text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  480,00 €
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  560,00 €
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Attachi stilo
  • Diametro:  60
Levertijd 10-15 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  33,00 €
Beknopt overzicht: 

The tension clamp enables workpieces to be clamped quickly and easily with low clamping force, without obstructing access to the measurement features.
  • Codice prodotto:  FX-CTSML
  • Filetto:  Senza filettatura
  • Compatibilità albero tensore:  FX-POST
  • Applicazione:  CMM, Bracci di misura portatili
Op voorraad - verzending 1-2 dagen
Support Stop (M8)
Support Stop (M8)
ID: FX-SUP__STOP
Prijs:  87,00 €
Beknopt overzicht: 

The support stop is used to secure workpieces with adjustable clamping force. By reversing the support stop, it can also be used as a compact V-block.
  • Codice prodotto:  FX-SUP/STOP
  • Filetto:  M8
Op voorraad - verzending 1-2 dagen
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prijs:  43,00 €
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/150
  • Dimensione:  30 x 30 x 150 mm
Op voorraad - verzending 1-2 dagen
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prijs:  22,00 €
Beknopt overzicht: 

The magnetic standoff provides reliable and repeatable holding and raising of magnetic workpieces without restricting access to relevant measurement areas.
  • Codice prodotto:  FX-SO/MAG
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  20 mm
Op voorraad - verzending 1-2 dagen
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prijs:  49,00 €
Beknopt overzicht: 

The pillar base plate is used to securely attach a pillar to either a CMM table or a fixture base plate.
  • Codice prodotto:  FX-PR30PLATE
  • Dimensione:  130 x 30 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prijs:  40,00 €
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/100
  • Dimensione:  30 x 30 x 100 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prijs:  49,00 €
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Codice prodotto:  FX-PR30/250
  • Dimensione:  30 x 30 x 250 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prijs:  38,00 €
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/50
  • Dimensione:  30 x 30 x 50 mm
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prijs:  18,00 €
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FX-SO16/30
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  30 mm
Op voorraad - verzending 1-2 dagen
Standoff Pin M8 (D = 16 mm / L = 20 mm)
Standoff Pin M8 (D = 16 mm / L = 20 mm)
ID: FX-SO__PIN
Prijs:  22,00 €
Beknopt overzicht: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Codice prodotto:  FX-SO/PIN
  • Filetto:  M8
  • Diametro:  16 mm
  • Lunghezza:  20 mm
Op voorraad - verzending 1-2 dagen
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prijs:  26,00 €
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Codice prodotto:  FX-SLIDER
  • Filetto:  M8
Op voorraad - verzending 1-2 dagen
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Prijs:  46,00 €
Beknopt overzicht: 

Pillars provide stable horizontal mounting of Swift-Fix elements at different heights on a fixture base plate or CMM table.
  • Codice prodotto:  FX-PR30/200
  • Dimensione:  30 x 30 x 200 mm
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Prijs:  1.318,00 €
Beknopt overzicht: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3
Prijs:  3.715,00 €
Beknopt overzicht: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-240AL3
  • Diametro esterno griffe (D1):  240
  • Campo di serraggio esterno (A):  1 - 288
  • Campo di serraggio interno (I):  35 - 295
  • Materiale:  Alluminio
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3
Prijs:  1.565,00 €
Beknopt overzicht: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-160SS3
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / Ø 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3
Prijs:  987,00 €
Beknopt overzicht: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-70SS3
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3-NF
Prijs:  CHF 930,00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-70SS3-NF
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3-NF
Prijs:  CHF 1.420,00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Codice prodotto:  FC-160SS3-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Levertijd 10-15 dagen