text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  1.565,00 €
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Esaurito - Presto disponibile
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  47,00 €
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
Esaurito - Presto disponibile
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prezzo:  39,00 €
Descrizione:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Esaurito - Presto disponibile
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/15
  • Lunghezza:  15 mm
  • Diametro:  8 mm
Esaurito - Presto disponibile
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prezzo:  2.530,00 €
Descrizione:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FV-FULLKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Esaurito - Presto disponibile
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  52,00 €
Descrizione:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Codice prodotto:  FV-CNRBRKT
Esaurito - Presto disponibile
Vee Block Single
ID: FV-VEE
Prezzo:  32,00 €
Descrizione:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Codice prodotto:  FV-VEE
Esaurito - Presto disponibile
Tension Post (M4)
ID: FV-POST
Prezzo:  19,00 €
Descrizione:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Codice prodotto:  FV-POST
  • Filetto:  M4
Esaurito - Presto disponibile
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  638,00 €
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200F
  • Filetto:  M4
Esaurito - Presto disponibile
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  46,00 €
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FV-SPRING
  • Filetto:  M4
Esaurito - Presto disponibile
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prezzo:  3.715,00 €
Descrizione:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-240AL3
  • Diametro esterno griffe (D1):  240
  • Campo di serraggio esterno (A):  1 - 288
  • Campo di serraggio interno (I):  35 - 295
  • Materiale:  Alluminio
Esaurito - Presto disponibile
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  1.296,00 €
Descrizione:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FX-STARTER/KIT
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Esaurito - Presto disponibile
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prezzo:  2.052,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP600/600
  • Filetto:  M8
Esaurito - Presto disponibile
RA8 ODU Power Supply (15V)
ID: H00003236
Prezzo:  130,00 €
Descrizione:  Power adapter, output AC 15V/4A. For use with all Series 8 Absolute Arm models.
  • Compatibilità:  Absolute Arm RA8
  • Codice prodotto:  H00003236
  • Uscita:  AC 15 V / 4A
Esaurito - Presto disponibile
RA8 ODU Ethernet Cable (L = 3 m)
ID: H00003263
Prezzo:  173,00 €
Descrizione: 

Ethernet cable with ODU connector, length 3 m. For use with all Series 8 Absolute Arm models using control packs CP1, CP2, CP3, CP-C, CP-B or CP-W. It is not suitable with control pack CP0.

  • Compatibilità:  Absolute Arm RA8
  • Codice prodotto:  H00003263
  • Lunghezza:  3
  • Tipo di connettore:  ODU
  • USB / LAN:  LAN
Esaurito - Presto disponibile
BS-Stylus (R-5-SS-3.5-L46.5)
ID: H00027368
Prezzo:  219,00 €
Descrizione: 

Straight stylus with break shaft connection, ruby ball Ø5 mm, stainless steel stem Ø3.5 mm, length 46.5 mm. For use on machine tools. Previous part number: 91.00-T49/5

  • Codice prodotto:  H00027368
  • Filetto:  Connessione albero di rottura
  • Materiale punta:  Rubino sintetico
  • Diametro punta (D):  5
  • Lunghezza (L):  46.5
Esaurito - Presto disponibile
M2-Stylus (R-0.3-TC-0.2/1-L9.85) - Stepped
ID: H00027462
Prezzo:  138,00 €
Descrizione: 

Straight stylus with M2 thread, ruby ball Ø0.3 mm, tungsten carbide stem (stepped) Ø0.2 mm / 1 mm, length 9.85 mm. For use on machine tools. Previous part number: 91.00-T10/0.3-HM-M2

  • Codice prodotto:  H00027462
  • Filetto:  M2
  • Materiale punta:  Rubino sintetico
  • Diametro punta (D):  0.3
  • Lunghezza (L):  9.85
Esaurito - Presto disponibile
M2-Stylus (R-3-TC-1.5-L10)
ID: H00027465
Prezzo:  43,00 €
Descrizione: 

Straight stylus with M2 thread, ruby ball Ø3 mm, tungsten carbide stem Ø1.5 mm, length 10 mm. For use on machine tools. Previous part number: 91.00-T11.5/3-HM-M2

  • Codice prodotto:  H00027465
  • Filetto:  M2
  • Materiale punta:  Rubino sintetico
  • Diametro punta (D):  3
  • Lunghezza (L):  10
Esaurito - Presto disponibile
Mounting Hook Wrench
ID: H00047098
Prezzo:  54,00 €
Descrizione: 

Hook wrench for adjusting Absolute Arm base on mounting ring.

  • Codice prodotto:  H00047098
  • Compatibilità:  Adattatore per anello di montaggio da 3,5“ a 4,5” (H00041163), 3.5" and 4.5" pouinting nut
Esaurito - Presto disponibile
M5-Stylus (R-1-TC-0.7-L20)
ID: M00-1121-002-000
Prezzo:  68,00 €
Descrizione:  Straight stylus with M5 thread, ruby ball Ø1 mm, tungsten carbide stem Ø0.7 mm, length 20 mm. For use on coordinate measuring machines (CMM).
  • Codice prodotto:  M00-1121-002-000
  • Filetto:  M5
  • Materiale punta:  Rubino sintetico
  • Diametro punta (D):  1
  • Lunghezza (L):  20
Esaurito - Presto disponibile