text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
SWIFT-SET
ID: GB0122-1000
Prezzo:  8.140,00 €
Descrizione: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.

  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  540,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  466,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Tempi di consegna 10-15 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  1.160,00 €
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Prezzo:  1.360,00 €
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio esterno (A):  1 - 150mm
  • Campo di serraggio interno (I):  34 - 174mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M6
Tempi di consegna 10-15 Giorni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  884,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Vee Locator
ID: FV-FEMALE
Prezzo:  25,00 €
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  42,00 €
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Disponibile - Spedizione in 1-2 Giorni
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  236,00 €
Descrizione:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  9,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  14,00 €
Descrizione:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  31,00 €
Descrizione:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Filetto:  Without Thread
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  695,00 €
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prezzo:  32,00 €
Descrizione:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prezzo:  968,00 €
Descrizione:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prezzo:  9,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  25 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff Support (M4)
ID: FV-SOSUP
Prezzo:  14,00 €
Descrizione:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  6 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Vee Block Single
ID: FV-VEE
Prezzo:  29,00 €
Descrizione:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M4)
ID: FV-POST
Prezzo:  15,00 €
Descrizione:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prezzo:  453,00 €
Descrizione:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile - Spedizione in 1-2 Giorni