text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  480,00 €
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
A szállítási idő 10-15 nap
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  560,00 €
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60
A szállítási idő 10-15 nap
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
Azonosító: FC-125SS3
Ár:  €1,220.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio esterno (A):  1 - 126
  • Campo di serraggio interno (I):  32 - 122
  • Materiale:  Acciaio inossidabile
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
Azonosító: FC-125AL6
Ár:  €1,220.00
Gyors áttekintés:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
Azonosító: FC-160AL6
Ár:  1 490,00 €
Gyors áttekintés:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
Azonosító: FC-160SS3
Ár:  1 490,00 €
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
Azonosító: FC-160SS3-NF
Ár:  1 420,00 €
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
Azonosító: FC-125AL6-NF
Ár:  1 140,00 €
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
Azonosító: FC-160AL6-NF
Ár:  1 490,00 €
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
A szállítási idő 10-15 nap
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
Azonosító: FC-125SS3-NF
Ár:  1 140,00 €
Gyors áttekintés: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio esterno (A):  1 - 126
  • Campo di serraggio interno (I):  32 - 122
  • Materiale:  Acciaio inossidabile
A szállítási idő 10-15 nap
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  930,00 €
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/400
  • Filetto:  M8
Raktáron - Kiszállítás 1-2 napon belül
Vee Locator
Vee Locator
Azonosító: FV-FEMALE
Ár:  33,00 €
Gyors áttekintés:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Codice prodotto:  FV-FEMALE
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  47,00 €
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
Raktáron - Kiszállítás 1-2 napon belül
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
Azonosító: FV-GUIDE480
Ár:  262,00 €
Gyors áttekintés:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  10,00 €
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Cone Adjustable (M4)
Cone Adjustable (M4)
Azonosító: FV-CONEADJ
Ár:  22,00 €
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
Azonosító: FX-BP300__300
Ár:  780,00 €
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
Raktáron - Kiszállítás 1-2 napon belül
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Azonosító: FV-LATSML
Ár:  39,00 €
Gyors áttekintés:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Codice prodotto:  FV-LATSML
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
Azonosító: FV-SO8__25
Ár:  10,00 €
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff Support (M4)
Standoff Support (M4)
Azonosító: FV-SOSUP
Ár:  18,00 €
Gyors áttekintés:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FV-SOSUP
  • Lunghezza:  6 mm
  • Diametro:  8 mm
Raktáron - Kiszállítás 1-2 napon belül