text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prezzo:  8.140,00 CHF
Descrizione: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  466,00 CHF
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  540,00 CHF
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Tempi di consegna 10-15 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  1.430,00 CHF
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio:  5 - 196mm
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prezzo:  3.300,00 CHF
Descrizione:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  240mm
  • Campo di serraggio esterno (A):  1 - 288mm
  • Campo di serraggio interno (I):  35 - 295mm
  • Materiale:  Alluminio
  • Serrraggio:  M8
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prezzo:  1.430,00 CHF
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  160mm
  • Campo di serraggio esterno (A):  1 - 150mm
  • Campo di serraggio interno (I):  34 - 174mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Prezzo:  17,00 CHF
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  50 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prezzo:  17,00 CHF
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  50 mm
  • Diametro:  20 mm
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  884,00 CHF
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  25,00 CHF
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  42,00 CHF
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Disponibile - Spedizione in 1-2 Giorni
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  5.270,00 CHF
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Compatibilità CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilità software:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Verifica della lunghezza: 20 minuti, Controllo anelli: 5 Minuti, Verifica della sfera: 5 Minuti, Verifica del polso / della testa del tastatore: 10 Minuti
  • Dimensioni:  Length Bar Length = 300 mm, Diametro dell'anello = 25 mm, Diametro de sfere = 25 mm
Consegna > 25 giorni
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prezzo:  9,00 CHF
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  15 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prezzo:  259,00 CHF
Descrizione:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prezzo:  17,00 CHF
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Vee Block Single
Vee Block Single
ID: FV-VEE
Prezzo:  29,00 CHF
Descrizione:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prezzo:  15,00 CHF
Descrizione:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prezzo:  453,00 CHF
Descrizione:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetto:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  337,00 CHF
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  83,00 CHF
Descrizione:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni