text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Standoff Support (M8)
Azonosító: FX-SO__SUPP
Ár:  22,00 €
Gyors áttekintés:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Alkatrészszám:  FX-SO/SUPP
  • Menet:  M8
  • Átmérő:  15 mm
  • Hosszúság:  10 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff Adjustable (M8)
Azonosító: FX-HEIGHT
Ár:  62,00 €
Gyors áttekintés: 

The adjustable standoff provides maximum flexibility when raising workpieces and positioning other Swift-Fix components.

  • Alkatrészszám:  FX-HEIGHT
  • Menet:  M8
  • Átmérő:  16 mm
  • Hosszúság:  50 mm
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 400x600x12mm (M8)
Azonosító: FX-BP400__600
Ár:  1 955,00 €
Gyors áttekintés: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Alkatrészszám:  FX-BP400/600
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Centering Pin
Azonosító: FV-MALE
Ár:  24,00 €
Gyors áttekintés:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Alkatrészszám:  FV-MALE
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Baseplate Retaining Screw (M8)
Azonosító: FX-BPRTR
Ár:  6,00 €
Gyors áttekintés: 

Retaining screws securely fasten base plates to the machine table and enable precise, repeatable positioning of multiple base plates side by side.

  • Alkatrészszám:  FX-BPRTR
  • Menet:  M8
A szállítási idő 10-15 nap
Swift-Fix Vision - Starter Kit
Azonosító: FV-STARTERKIT
Ár:  1 254,00 €
Gyors áttekintés: 

The Swift-Fix Starter Kit contains the essential components required for fixture applications on multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Alkatrészszám:  FV-STARTERKIT
  • Menet:  M4
  • Alkalmazás:  Multiszenzoros koordináta-mérőgép
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 15 mm)
Azonosító: FV-SO8__15
Ár:  10,00 €
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/15
  • Menet:  M4
  • Átmérő:  8 mm
  • Hosszúság:  15 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 20 mm / L = 30 mm)
Azonosító: FX-SO20__30
Ár:  18,00 €
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO20/30
  • Menet:  M8
  • Átmérő:  20 mm
  • Hosszúság:  30 mm
A szállítási idő 10-15 nap
Cap Screw Set M8 (L = 16 mm)
Azonosító: FX-CAPM8__16
Ár:  19,00 €
Gyors áttekintés:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Alkatrészszám:  FX-CAPM8/16
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Universal Joint
Azonosító: FX-UNI__JOINT
Ár:  95,00 €
Gyors áttekintés:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Alkatrészszám:  FX-UNI/JOINT
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix Vision - Full Kit
Azonosító: FV-FULLKIT
Ár:  2 530,00 €
Gyors áttekintés: 

The Swift-Fix Full Kit provides all components required to meet the fixturing needs of multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Alkatrészszám:  FV-FULLKIT
  • Menet:  M4
  • Alkalmazás:  Multiszenzoros koordináta-mérőgép
Raktáron - Kiszállítás 1-2 napon belül
Vee Locator (M8)
Azonosító: FX-VEE
Ár:  77,00 €
Gyors áttekintés: 

The Vee locator can be mounted directly on the base plate or on top of standoffs for precise positioning of large workpieces.

  • Alkatrészszám:  FX-VEE
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Support Kit
Azonosító: FX-KINKIT
Ár:  262,00 €
Gyors áttekintés:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Alkatrészszám:  FX-KINKIT
Raktáron - Kiszállítás 1-2 napon belül
Standoff Magnet  (D = 16 mm / L = 20 mm)
Azonosító: FX-SO__MAG
Ár:  22,00 €
Gyors áttekintés: 

The magnetic standoff provides reliable and repeatable holding and raising of magnetic workpieces without restricting access to relevant measurement areas.

  • Alkatrészszám:  FX-SO/MAG
  • Menet:  M8
  • Átmérő:  16 mm
  • Hosszúság:  20 mm
Raktáron - Kiszállítás 1-2 napon belül
Pillar Base Plate
Azonosító: FX-PR30PLATE
Ár:  49,00 €
Gyors áttekintés: 

The pillar base plate is used to securely attach a pillar to either a CMM table or a fixture base plate.

  • Alkatrészszám:  FX-PR30PLATE
  • Méret:  130 x 30 mm
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Azonosító: FV-BP200__200C
Ár:  605,00 €
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Alkatrészszám:  FV-BP200/200C
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Angle Block Slider (M4)
Azonosító: FV-ANGSLIDER
Ár:  22,00 €
Gyors áttekintés:  The angle block slider enables users to position elements horizontally on the base plate.
  • Alkatrészszám:  FV-ANGSLIDER
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Pillar 30x30x100mm
Azonosító: FX-PR30__100
Ár:  40,00 €
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Alkatrészszám:  FX-PR30/100
  • Méret:  30 x 30 x 100 mm
Raktáron - Kiszállítás 1-2 napon belül
Pillar 30x30x250mm
Azonosító: FX-PR30__250
Ár:  49,00 €
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Alkatrészszám:  FX-PR30/250
  • Méret:  30 x 30 x 250 mm
Raktáron - Kiszállítás 1-2 napon belül
Pillar 30x30x50mm
Azonosító: FX-PR30__50
Ár:  38,00 €
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Alkatrészszám:  FX-PR30/50
  • Méret:  30 x 30 x 50 mm
Raktáron - Kiszállítás 1-2 napon belül