text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  480,00 €
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0019
  • Kompatibilitás:  HP-S-X3 Tapintótárak
  • Átmérő:  40
A szállítási idő 10-15 nap
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  560,00 €
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Alkatrészszám:  GB0122-0008
  • Kompatibilitás:  HP-S-X1 Tapintótárak
  • Átmérő:  60
A szállítási idő 10-15 nap
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
Azonosító: FC-125AL6
Ár:  1 318,00 €
Gyors áttekintés: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Alkatrészszám:  FC-125AL6
  • Befogó tokmány külső átmérője (D1):  125
  • Befogási tartomány:  5 - 156
  • Anyag:  Alumínium
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck with Flange (Aluminium / Ø 160 mm)
Azonosító: FC-160AL6
Ár:  1 565,00 €
Gyors áttekintés: 

6-Jaw chuck with flange made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Alkatrészszám:  FC-160AL6
  • Befogó tokmány külső átmérője (D1):  160
  • Befogási tartomány:  5 - 196
  • Anyag:  Alumínium
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
Azonosító: FC-125AL6-NF
Ár:  1 140,00 €
Gyors áttekintés: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Alkatrészszám:  FC-125AL6-NF
  • Befogó tokmány külső átmérője (D1):  125
  • Befogási tartomány:  5 - 156
  • Anyag:  Alumínium
  • Rögzítés (G):  M5
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
Azonosító: FC-160AL6-NF
Ár:  1 490,00 €
Gyors áttekintés: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Alkatrészszám:  FC-160AL6-NF
  • Befogó tokmány külső átmérője (D1):  160
  • Befogási tartomány:  5 - 196
  • Anyag:  Alumínium
  • Rögzítés (G):  M6
A szállítási idő 10-15 nap
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
Azonosító: FC-125SS3-NF
Ár:  1 140,00 €
Gyors áttekintés: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Alkatrészszám:  FC-125SS3-NF
  • Befogó tokmány külső átmérője (D1):  125
  • Külső befogási tartomány (A):  1 - 126
  • Belső befogási tartomány (I):  32 - 122
  • Anyag:  Rozsdamentes acél
A szállítási idő 10-15 nap
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  10,00 €
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FV-SO8/20
  • Menet:  M4
  • Átmérő:  8 mm
  • Hosszúság:  20 mm
Raktáron - Kiszállítás 1-2 napon belül
Adjustable Cone (M4)
Azonosító: FV-CONEADJ
Ár:  22,00 €
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Alkatrészszám:  FV-CONEADJ
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
Azonosító: FV-BP200__200P
Ár:  594,00 €
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Alkatrészszám:  FV-BP200/200P
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 400x600x12mm (M8)
Azonosító: FX-BP400__600
Ár:  1 955,00 €
Gyors áttekintés: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Alkatrészszám:  FX-BP400/600
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff Pin (D = 8 mm / L = 10 mm)
Azonosító: FV-SO__PIN
Ár:  19,00 €
Gyors áttekintés: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.

  • Alkatrészszám:  FV-SO/PIN
  • Menet:  M4
  • Átmérő:  8 mm
  • Hosszúság:  10 mm
Raktáron - Kiszállítás 1-2 napon belül
Corner Bracket
Azonosító: FV-CNRBRKT
Ár:  52,00 €
Gyors áttekintés:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Alkatrészszám:  FV-CNRBRKT
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Single
Azonosító: FV-VEE
Ár:  32,00 €
Gyors áttekintés:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Alkatrészszám:  FV-VEE
Raktáron - Kiszállítás 1-2 napon belül
Tension Post (M4)
Azonosító: FV-POST
Ár:  19,00 €
Gyors áttekintés: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M4 components.

  • Alkatrészszám:  FV-POST
  • Menet:  M4
  • Alkalmazás:  Multiszenzoros koordináta-mérőgép
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix - Basic Kit
Azonosító: FX-BASIC__KIT
Ár:  475,00 €
Gyors áttekintés: 

The Swift-Fix Basic Kit provides the essential components required for basic fixture applications. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Alkatrészszám:  FX-BASIC/KIT
  • Menet:  M8
  • Alkalmazás:  Koordináta-mérőgép, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot with Handle
Azonosító: FX-PR30HINGE
Ár:  84,00 €
Gyors áttekintés: 

The hinge pivot connects two pillars at adjustable angles, providing greater flexibility when mounting large fixtures.

  • Alkatrészszám:  FX-PR30HINGE
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 66 mm)
Azonosító: FX-CTMED
Ár:  33,00 €
Gyors áttekintés: 

The tension clamp enables workpieces to be clamped quickly and easily with medium clamping force, without obstructing access to the measurement features.

  • Alkatrészszám:  FX-CTMED
  • Menet:  Menet nélküli
  • Feszítő tartó kompatibilitás:  FX-POST
  • Alkalmazás:  Koordináta-mérőgép, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 100 mm)
Azonosító: FX-SO16__100
Ár:  26,00 €
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Alkatrészszám:  FX-SO16/100
  • Menet:  M8
  • Átmérő:  16 mm
  • Hosszúság:  100 mm
Raktáron - Kiszállítás 1-2 napon belül
Spring Nut (M8)
Azonosító: FX-M8SPRGNUT
Ár:  33,00 €
Gyors áttekintés: 

Spring nuts added to a pillar provide greater flexibility when positioning vertically mounted elements.

  • Alkatrészszám:  FX-M8SPRGNUT
Raktáron - Kiszállítás 1-2 napon belül