text.skipToContent text.skipToNavigation
Hexagons COVID-19 Support & Response | Official Statement

Choisissez votre pays ou zone géographique

  • 1(current)
  • 2
  • 3
106 Produit(s) trouvé(s)
  • SWIFT-CHECK SWIFT-CHECK N° : GB0096-2001
    4 550,00 €

    Livraison sous 10 à 15 jours

    SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
    Compatibilité MMT GLOBAL S 
    GLOBAL Lite 
    TIGO SF 
    4.5.4 SF 
    7.10.7 SF 
    Software Compatibility PC-DMIS (V2016 onwards)  
    QUINDOS (Q7R18351 onwards)  
    Run Times Length Check: 20 Minutes 
    Ring Check: 5 Minutes 
    Sphere Check: 5 Minutes 
    Wrist- / Probe Head Check: 10 Minutes 
    Dimensions Length Bar Length = 300 mm 
    Ring Gauge Diameter = 25 mm 
    Sphere Diameter = 25 mm 
  • Kinematic Fixture Plate 300x300mm (Plain) Kinematic Fixture Plate 300x300mm (Plain) N° : KPP-300__300
    470,00 €

    En stock - Livraison sous 1 à 2 jours

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Plaque adaptable KB-250/250 
    KB-UNIVL 
  • Fixture Baseplate 300x400x12mm (M8) Fixture Baseplate 300x400x12mm (M8) N° : FX-BP300__400
    840,00 €

    En stock - Livraison sous 1 à 2 jours

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Filetage M8 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) N° : FX-SO16__100
    22,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 100 mm 
    Diamètre 16 mm 
  • Standoff (D = 20 mm / L = 100 mm) Standoff (D = 20 mm / L = 100 mm) N° : FX-SO20__100
    23,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 100 mm 
    Diamètre 20 mm 
  • 6-Jaw Chuck without Flange (Aluminium / D=125 mm) 6-Jaw Chuck without Flange (Aluminium / D=125 mm) N° : FC-125AL6-NF
    1 090,00 €

    Livraison sous 10 à 15 jours

    Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Diamètre extérieur du mandrin (D1) 125 mm
    Plage de fixation 5 - 156 mm
    Matériau Aluminium 
    Fixation (G) M5 
  • Kinematic Fixture Plate 500x500 mm (M8) Kinematic Fixture Plate 500x500 mm (M8) N° : KPT-500__500
    1 690,00 €

    En stock - Livraison sous 1 à 2 jours

    The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
    Plaque adaptable KB-400/400 
    KB-UNIVL 
  • Standoff Magnet  (D = 16 mm / L = 20 mm) Standoff Magnet (D = 16 mm / L = 20 mm) N° : FX-SO__MAG
    19,00 €

    En stock - Livraison sous 1 à 2 jours

    The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Standoff (D = 20 mm / L = 50 mm) Standoff (D = 20 mm / L = 50 mm) N° : FX-SO20__50
    16,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 50 mm 
    Diamètre 20 mm 
  • Cone Adjustable (M4) Cone Adjustable (M4) N° : FV-CONEADJ
    13,00 €

    En stock - Livraison sous 1 à 2 jours

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Filetage M4 
  • Standoff Pin M8 (D= 16 mm/L= 20 mm) Standoff Pin M8 (D= 16 mm/L= 20 mm) N° : FX-SO__PIN
    19,00 €

    En stock - Livraison sous 1 à 2 jours

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Universal Kinematic Fixture Base Universal Kinematic Fixture Base N° : KB-UNIVL
    560,00 €

    En stock - Livraison sous 1 à 2 jours

    The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
    Plaque adaptable KPP-300/300 
    KPT-300/300 
    KPP-400/400 
    KPT-400/400 
    KPP-500/500 
    KPT-500/500 
  • Standoff Pin (D = 8 mm / L = 10 mm) Standoff Pin (D = 8 mm / L = 10 mm) N° : FV-SO__PIN
    12,00 €

    En stock - Livraison sous 1 à 2 jours

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Longueur 10 mm 
    Diamètre 8 mm 
  • Kinematic Support Kit Plus Kinematic Support Kit Plus N° : FX-KINKITPLUS
    250,00 €

    En stock - Livraison sous 1 à 2 jours

    The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
    Plaque adaptable KB-UNIVL 
  • 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) N° : FC-125SS3
    1 160,00 €

    En stock - Livraison sous 1 à 2 jours

    Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Diamètre extérieur du mandrin (D1) 125 mm
    Plage de serrage extérieur (A) 1 - 126 mm
    Plage de serrage intérieur (I) 32 - 122 mm
    Matériau Acier inoxydable 
    Fixation M4 / M8 
  • Spring Clamp (M8) Spring Clamp (M8) N° : FX-SPRING
    48,00 €

    En stock - Livraison sous 1 à 2 jours

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Filetage Without Thread 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) N° : FX-SO16__20
    15,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) N° : FX-CTMED
    29,00 €

    En stock - Livraison sous 1 à 2 jours

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Filetage Without Thread 
  • Spring Pusher Standoff Clamp (D=16mm / L=20mm) Spring Pusher Standoff Clamp (D=16mm / L=20mm) N° : FX-LATMED
    40,00 €

    En stock - Livraison sous 1 à 2 jours

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Kinematic Fixture Plate 300x300 mm (M8) Kinematic Fixture Plate 300x300 mm (M8) N° : KPT-300__300
    740,00 €

    En stock - Livraison sous 1 à 2 jours

    The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
    Plaque adaptable KB-250/250 
    KB-UNIVL 
    • 1(current)
    • 2
    • 3