Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Choisissez votre pays ou zone géographique
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
14,00 €
En stock - Livraison sous 1 à 2 jours
A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
Filetage | M4 |
500,00 €
En stock - Livraison sous 1 à 2 jours
Rack port holder to upgrade the 3-port probe module rack HR-MP3-150L (03939499) to a 6-Port probe module rack. Height: 150 mm
Protection de collision | Non |
Recalibrage automatique | Non |
166,00 €
En stock - Livraison sous 1 à 2 jours
Sensor module rack extension to lift up HR-MP racks to a total height of 200 mm. Length 110 mm.
Longueur | 110 mm |
Diamètre | 19,5 mm |
166,00 €
En stock - Livraison sous 1 à 2 jours
Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.
Longueur | 160 mm |
Diamètre | 19,5 mm |
1 540,00 €
En stock - Livraison sous 1 à 2 jours
Kit with accurate base
and crash protection
Protection de collision | Qui |
Recalibrage automatique | Qui |
155,00 €
En stock - Livraison sous 1 à 2 jours
Port changeur de stylet pour palpeur de scanning HP-S-X3.
Nombre de ports | 1 |
Comptabilité palpeur | HP-S-X3 |
359,00 €
En stock - Livraison sous 1 à 2 jours
Port changeur de stylet avec cache pour palpeurs de scanning HP-S-X1S, HP-S-X1H et HP-S-X1C.
Nombre de ports | 1 |
Comptabilité palpeur |
HP-S-X1S HP-S-X1H HP-S-X1C |
214,00 €
En stock - Livraison sous 1 à 2 jours
Port changeur de stylet pour les palpeurs de scanning HP-S-X1S, HP-S-X1H et HP-S-X1C.
Nombre de ports | 1 |
Comptabilité palpeur |
HP-S-X1H HP-S-X1S HP-S-X1C |
720,00 €
En stock - Livraison sous 1 à 2 jours
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Plaque adaptable |
KB-400/400 KB-UNIVL |
30,00 €
En stock - Livraison sous 1 à 2 jours
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Longueur | 10 mm |
Diamètre | 8 mm |
920,00 €
En stock - Livraison sous 1 à 2 jours
The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Filetage | M8 |
Application |
MMT Bras de mesure portables |
24,00 €
En stock - Livraison sous 1 à 2 jours
This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
Filetage | M8 |
86,00 €
En stock - Livraison sous 1 à 2 jours
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
Filetage | M8 |
23,00 €
En stock - Livraison sous 1 à 2 jours
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
Filetage | M8 |
79,00 €
En stock - Livraison sous 1 à 2 jours
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
Filetage | M8 |
44,00 €
En stock - Livraison sous 1 à 2 jours
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Filetage | M4 |
221,00 €
En stock - Livraison sous 1 à 2 jours
Standard base with standard cylinder, standard fixation piece and mounting equipment
Protection de collision | Non |
Recalibrage automatique | Non |
49,00 €
En stock - Livraison sous 1 à 2 jours
Safety / locking pin for the 3-port probe module and arm of the rack
Longueur | 22 mm |
Diamètre | 8 mm |
15,00 €
En stock - Livraison sous 1 à 2 jours
Mastic pour nettoyer la poussière et la saleté des pièces, des appareils et des équipements de mesure.
3 160,00 €
Livraison sous 10 à 15 jours
Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
Diamètre extérieur du mandrin (D1) | 240 mm |
Plage de serrage extérieur (A) | 1 - 288 mm |
Plage de serrage intérieur (I) | 35 - 295 mm |
Matériau | Aluminium |
Fixation (G) | M8 |
Ajouté au panier.
Disponibilité du produit par site
Horaires