Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Choisissez votre pays ou zone géographique
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
9,00 €
En stock - Livraison sous 1 à 2 jours
With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
Filetage | M8 |
9,00 €
En stock - Livraison sous 1 à 2 jours
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Longueur | 25 mm |
Diamètre | 8 mm |
840,00 €
En stock - Livraison sous 1 à 2 jours
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Filetage | M8 |
40,00 €
En stock - Livraison sous 1 à 2 jours
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
610,00 €
En stock - Livraison sous 1 à 2 jours
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
Plaque adaptable |
KPP-400/400 KPT-400/400 |
24,00 €
En stock - Livraison sous 1 à 2 jours
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
45,00 €
En stock - Livraison sous 1 à 2 jours
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
224,00 €
En stock - Livraison sous 1 à 2 jours
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Plaque adaptable |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
51,00 €
En stock - Livraison sous 1 à 2 jours
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Taille | 120 x 45 x 12 mm |
14,00 €
En stock - Livraison sous 1 à 2 jours
This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
Filetage | M4 |
39,00 €
En stock - Livraison sous 1 à 2 jours
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Taille | 30 x 30 x 150 mm |
14,00 €
En stock - Livraison sous 1 à 2 jours
A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
Filetage | M4 |
238,00 €
En stock - Livraison sous 1 à 2 jours
The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
86,00 €
En stock - Livraison sous 1 à 2 jours
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
Filetage | M8 |
70,00 €
En stock - Livraison sous 1 à 2 jours
The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
Filetage | M8 |
18,00 €
En stock - Livraison sous 1 à 2 jours
The angle block slider enables users to position elements horizontally on the base plate.
Filetage | M4 |
15,00 €
En stock - Livraison sous 1 à 2 jours
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Longueur | 30 mm |
Diamètre | 16 mm |
430,00 €
En stock - Livraison sous 1 à 2 jours
The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
Filetage | M8 |
Application |
MMT Bras de mesure portables |
102,00 €
En stock - Livraison sous 1 à 2 jours
Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
Filetage | M8 |
12,00 €
En stock - Livraison sous 1 à 2 jours
The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
Filetage | M4 |
Ajouté au panier.
Disponibilité du produit par site
Horaires