text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
N° : FC-240AL3-NF
Prix:  3 570,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  240mm
  • Plage de serrage extérieur (A):  1 - 288mm
  • Plage de serrage intérieur (I):  35 - 295mm
  • Matériau:  Aluminium
  • Fixation (G):  M8
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  493,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  582,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Livraison sous 10 à 15 jours
SWIFT-SET
N° : GB0122-1000
Prix:  7 431,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.
  • Comptabilité:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Livraison sous 10 à 15 jours
SWIFT-CHECK
N° : GB0096-2001
Prix:  5 169,00 CHF
Vue d'ensemble sommaire:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Compatibilité MMT:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilité logicielle:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Times:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Diamètre de bague = 25 mm, Diamètre de la boule = 25 mm
Livraison sous 10 à 15 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
N° : FC-125SS3
Prix:  1 308,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  125mm
  • Plage de serrage extérieur (A):  1 - 126mm
  • Plage de serrage intérieur (I):  32 - 122mm
  • Matériau:  Acier inoxydable
  • Fixation:  M4 / M8
En stock - Livraison sous 1 à 2 jours
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
N° : FC-125AL6
Prix:  1 308,00 CHF
Vue d'ensemble sommaire:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  125mm
  • Plage de fixation:  5 - 156mm
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
En stock - Livraison sous 1 à 2 jours
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
N° : FC-160AL6
Prix:  1 615,00 CHF
Vue d'ensemble sommaire:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  160mm
  • Plage de fixation:  5 - 196mm
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
En stock - Livraison sous 1 à 2 jours
Guide Rail (L = 480 mm)
N° : FV-GUIDE480
Prix:  235,00 CHF
Vue d'ensemble sommaire:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plaque adaptable:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  9,00 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Cone Adjustable (M4)
N° : FV-CONEADJ
Prix:  14,00 CHF
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x300x12mm (M8)
N° : FX-BP300__300
Prix:  693,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
N° : FV-LATSML
Prix:  32,00 CHF
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  10 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix Vision - Full Kit
N° : FV-FULLKIT
Prix:  2 111,00 CHF
Vue d'ensemble sommaire:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M4
  • Application:  Multisensor CMM
En stock - Livraison sous 1 à 2 jours
Flexible Vice
N° : FV-SLIDE
Prix:  258,00 CHF
Vue d'ensemble sommaire:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
N° : FV-BP200__200C
Prix:  263,00 CHF
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Angle Block Slider (M4)
N° : FV-ANGSLIDER
Prix:  19,00 CHF
Vue d'ensemble sommaire:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Vee Block Single
N° : FV-VEE
Prix:  29,00 CHF
Vue d'ensemble sommaire:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
En stock - Livraison sous 1 à 2 jours
Tension Post (M4)
N° : FV-POST
Prix:  15,00 CHF
Vue d'ensemble sommaire:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Basic Kit
N° : FX-BASIC__KIT
Prix:  452,00 CHF
Vue d'ensemble sommaire:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
En stock - Livraison sous 1 à 2 jours