Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Choisissez votre pays ou zone géographique
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
47,00 CHF
En stock - Livraison sous 1 à 2 jours
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
977,00 CHF
En stock - Livraison sous 1 à 2 jours
The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
36,00 CHF
En stock - Livraison sous 1 à 2 jours
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Taille | 30 x 30 x 50 mm |
38,00 CHF
En stock - Livraison sous 1 à 2 jours
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Taille | 30 x 30 x 100 mm |
47,00 CHF
En stock - Livraison sous 1 à 2 jours
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
Taille | 30 x 30 x 250 mm |
44,00 CHF
En stock - Livraison sous 1 à 2 jours
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Taille | 30 x 30 x 200 mm |
30,00 CHF
En stock - Livraison sous 1 à 2 jours
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
54,00 CHF
En stock - Livraison sous 1 à 2 jours
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Taille | 120 x 45 x 12 mm |
41,00 CHF
En stock - Livraison sous 1 à 2 jours
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Taille | 30 x 30 x 150 mm |
47,00 CHF
En stock - Livraison sous 1 à 2 jours
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
Taille | 130 x 30 mm |
Ajouté au panier.
Disponibilité du produit par site
Horaires