text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  £436.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40mm
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  £509.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60mm
Tiempo de entrega 10-15 días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  £30.00
Descripción rápida:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Referencia:  FV-FEMALE
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  £238.00
Descripción rápida:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  £9.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Longitud:  20 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Precio:  £20.00
Descripción rápida:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Referencia:  FV-CONEADJ
  • Rosca:  M4
En Stock - Envío 1-2 Días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  £45.00
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Referencia:  FX-SPRING
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  £9.00
Descripción rápida:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Referencia:  FX-THUMB
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Precio:  £55.00
Descripción rápida:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Referencia:  FX-SUB45/120
  • Tamaño:  120 x 45 x 12 mm
En Stock - Envío 1-2 Días
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  £1,091.00
Descripción rápida:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FX-STARTER/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Support Stop
Support Stop
ID: FX-SUP__STOP
Precio:  £79.00
Descripción rápida:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Referencia:  FX-SUP/STOP
  • Rosca:  M8
En Stock - Envío 1-2 Días
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Precio:  £25.00
Descripción rápida:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Referencia:  FX-TOOLS
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Precio:  £16.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/30
  • Longitud:  30 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Precio:  £86.00
Descripción rápida:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Referencia:  FX-UNI/JOINT
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Locator
Vee Locator
ID: FX-VEE
Precio:  £70.00
Descripción rápida:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Referencia:  FX-VEE
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Precio:  £17.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/50
  • Longitud:  50 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Precio:  £126.00
Descripción rápida:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Referencia:  FX-TOG
  • Rosca:  M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  £1,109.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125SS3
  • Diámetro exterior mandril (D1):  125mm
  • Area de fijación exterior (A):  1 - 126mm
  • Area de fijación interior (I):  32 - 122mm
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Precio:  £1,109.00
Descripción rápida:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125mm
  • Area de fijación:  5 - 156mm
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Precio:  £1,355.00
Descripción rápida:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160AL6
  • Diámetro exterior mandril (D1):  160mm
  • Area de fijación:  5 - 196mm
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días