text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo

Catálogo

T-Mac Inspect TMC30-I Cable, 30 m
T-Mac Inspect TMC30-I Cable, 30 m
ID: 576510
Precio:  CHF1,290.00
Descripción rápida:  T-Mac Inspect TMC30-I Cable, 30 m
  • Referencia:  576510
  • Compatibilidad del sistema:  Leica Absolute Tracker AT960
  • Longitud:  30
Tiempo de entrega 10-15 días
Red-Ring Reflector (RRR) 7/8", 5-Pack
Red-Ring Reflector (RRR) 7/8", 5-Pack
ID: 576313
Precio:  CHF8,706.00
Descripción rápida:  Red-Ring Reflector (RRR) 7/8", 5-pack
  • Referencia:  576313
  • Tamaño:  7/8"
  • Radio (mm):  11.1125
Tiempo de entrega 10-15 días
Target D1=15 mm retro coded No. 151-500 (M)
Target D1=15 mm retro coded No. 151-500 (M)
ID: ART111277
Precio:  CHF2,780.00
Descripción rápida:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Referencia:  ART111277
  • Codificación:  14 bits
  • Rango de números:  151 - 500
  • Tipo de reflexión:  Retro-reflexivo
  • Diámetro (D1):  15
Tiempo de entrega 10-15 días
AID15 for Inner Diameters
AID15 for Inner Diameters
ID: 577357
Precio:  CHF507.00
Descripción rápida:  AID15 for Inner Diameters
  • Referencia:  577357
  • Tamaño del reflector:  1.5"
  • Rosca:  M8
Tiempo de entrega 10-15 días
CFK Extension Rod 650 mm
CFK Extension Rod 650 mm
ID: 577360
Precio:  CHF279.00
Descripción rápida:  CFK Extension Rod 650 mm
  • Referencia:  577360
  • Rosca:  M8
  • Compatibilidad del sistema:  Leica Absolute Tracker AT930, Leica Absolute Tracker AT960, Leica Absolute Tracker ATS600
Tiempo de entrega 10-15 días
Probe with M3-Pointer Stylus (C-200)
Probe with M3-Pointer Stylus (C-200)
ID: 54397-18
Precio:  CHF510.00
Descripción rápida:  Standard probe with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  54397-18
  • Longitud:  200
Entrega > 25 días
Probe with M3-Pointer Stylus (C-85)
Probe with M3-Pointer Stylus (C-85)
ID: 54397-03
Precio:  CHF510.00
Descripción rápida:  85 mm carbon probe with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  54397-03
  • Longitud:  85
Entrega > 25 días
Probe with M3-Pointer Stylus (C-180)
Probe with M3-Pointer Stylus (C-180)
ID: 54397-15
Precio:  CHF510.00
Descripción rápida:  180 mm carbon probe with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  54397-15
  • Longitud:  180
Entrega > 25 días
GEB243 Battery int Li-Ion 14.4 V / 6400 mAh
GEB243 Battery int Li-Ion 14.4 V / 6400 mAh
ID: 971703
Precio:  CHF386.00
Descripción rápida: 

Rechargable internal Li-Ion battery Li-Ion 14.4 V / 6400 mAh
  • Referencia:  971703
  • Compatibilidad del sistema:  TM6100A Motorized Industrial Theodolite
Tiempo de entrega 10-15 días
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
ID: TC-014571
Precio: 
Descripción rápida: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Tipo de clase:  Classroom Training
  • Start Date:  13/04/2026
  • Ciudad:  Telford
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
ID: TC-014574
Precio: 
Descripción rápida: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Tipo de clase:  Classroom Training
  • Start Date:  11/05/2026
  • Ciudad:  Telford
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
ID: TC-014576
Precio: 
Descripción rápida: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Tipo de clase:  Classroom Training
  • Start Date:  15/06/2026
  • Ciudad:  Telford
Classroom Training - QUINDOS Level 1 – Basic
Classroom Training - QUINDOS Level 1 – Basic
ID: TC-014862
Precio: 
Descripción rápida: 

Onsite Training - QUINDOS Level 1 – Basic  - 5 days

Course summary/agenda:
The QUINDOS level 1 - The basic course is designed for first time and experienced CMM users alike in terms of basic QUINDOS knowledge. The course begins with the basics of CMMs and an introduction to the QUINDOS software and machine configuration. The week progresses with advancing tasks enabling the delegate to build programs for the measurement and evaluation of Geometric Components, whilst learning optimised methods for programming. During the week there will be opportunities to fault find allowing the delegate to competently work when they are back in their workplace. During the course, we assess each delegate to ensure common tasks will be incorporated making the learning outcome more specific to each application.
  • Tipo de clase:  Classroom Training
  • Start Date:  22/06/2026
  • Ciudad:  Telford
Absolute Arm Raiser (500 mm) with Mounting Ring 3.5"
Absolute Arm Raiser (500 mm) with Mounting Ring 3.5"
ID: NCA7-5-52795
Precio:  CHF2,500.00
Descripción rápida: 

Multi-purpose 500 mm stand, suitable for Absolute Arm tube stations as well as other high-accuracy arm applications. For use with all Absolute Arm models, except Absolute Arm model RA8v3.
  • Referencia:  NCA7-5-52795
  • Tamaño de brazo recomendado:  1,5 - 4,5
  • Compatibilidad:  Absolute Arm RA7, Absolute Arm RA8
Entrega > 25 días
Absolute Arm Raiser (250 mm) with Mounting Ring 3.5"
Absolute Arm Raiser (250 mm) with Mounting Ring 3.5"
ID: NCA7-5-52794
Precio:  CHF2,100.00
Descripción rápida: 

Multi-purpose 250 mm stand, suitable for Absolute Arm tube stations as well as other high-accuracy arm applications. For use with all Absolute Arm models, except Absolute Arm model RA8v3.
  • Referencia:  NCA7-5-52794
  • Tamaño de brazo recomendado:  1,5 - 4,5
  • Compatibilidad:  Absolute Arm RA7, Absolute Arm RA8
Entrega > 25 días
Probe with fixed ball (SS-10-C-50)
Probe with fixed ball (SS-10-C-50)
ID: H00000383-02
Precio:  CHF510.00
Descripción rápida:  50 mm carbon probe with glue-mounted stainless steel ball Ø10 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-02
  • Diámetro de punta:  10
  • Longitud:  50
Entrega > 25 días
Probe with fixed ball (SS-10-C-75)
Probe with fixed ball (SS-10-C-75)
ID: H00000383-04
Precio:  CHF510.00
Descripción rápida:  75 mm carbon probe with glue-mounted stainless steel ball Ø10 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-04
  • Diámetro de punta:  10
  • Longitud:  75
Entrega > 25 días
Probe with M3-Stylus (R-4-C-85)
Probe with M3-Stylus (R-4-C-85)
ID: H00000576-02
Precio:  CHF510.00
Descripción rápida:  85 mm carbon probe with mounted ruby ball M3-Stylus Ø4 mm. For use with all Absolute Arm models.
  • Referencia:  H00000576-02
  • Diámetro de punta:  4
  • Longitud:  85
Entrega > 25 días
Probe with fixed ball (SS-10-C-180)
Probe with fixed ball (SS-10-C-180)
ID: H00000383-15
Precio:  CHF510.00
Descripción rápida:  180 mm carbon probe with glue-mounted stainless steel ball Ø10 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-15
  • Diámetro de punta:  10
  • Longitud:  180
Entrega > 25 días
Probe with fixed ball (SS-15-C-165)
Probe with fixed ball (SS-15-C-165)
ID: H00000383-14
Precio:  CHF510.00
Descripción rápida:  165 mm carbon probe with glue-mounted stainless steel ball Ø15 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-14
  • Diámetro de punta:  15
  • Longitud:  165
Entrega > 25 días