text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  480,00 CHF
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  560,00 CHF
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Precio:  22,00 CHF
Descripción rápida:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Referencia:  FX-SO/SUPP
  • Longitud:  10 mm
  • Diámetro:  15 mm
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Precio:  18,00 CHF
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/30
  • Longitud:  30 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Precio:  95,00 CHF
Descripción rápida:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Referencia:  FX-UNI/JOINT
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Locator
Vee Locator
ID: FX-VEE
Precio:  77,00 CHF
Descripción rápida:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Referencia:  FX-VEE
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Precio:  22,00 CHF
Descripción rápida:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Referencia:  FX-SO/MAG
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  49,00 CHF
Descripción rápida:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Referencia:  FX-PR30PLATE
  • Tamaño:  130 x 30 mm
En Stock - Envío 1-2 Días
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Precio:  22,00 CHF
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Referencia:  FX-SO/PIN
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Precio:  26,00 CHF
Descripción rápida:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FX-SLIDER
  • Rosca:  M8
En Stock - Envío 1-2 Días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  1.004,00 CHF
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  33,00 CHF
Descripción rápida:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Referencia:  FX-CTSML
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  15,00 CHF
Descripción rápida:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Referencia:  FV-CONE
  • Rosca:  M4
En Stock - Envío 1-2 Días
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Precio:  364,00 CHF
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Referencia:  FC-JS-70SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Precio:  830,00 CHF
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).
  • Referencia:  FC-PS-125AL6
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Precio:  940,00 CHF
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Referencia:  FC-PS-160AL6
Tiempo de entrega 10-15 días
Reversible Top Jaw Set for Inside/Outside Clamping
Reversible Top Jaw Set for Inside/Outside Clamping
ID: FC-JS-240SS3-IE
Precio:  1.120,00 CHF
Descripción rápida: 

Reversible top jaw set for inside and outside clamping. Made of stainless steel, vacuum hardened, ground. Compatible with 3-jaw chucks made of Aluminium with Ø240 mm.
  • Referencia:  FC-JS-240SS3-IE
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
Kinematic Fixture Plate 400x400x16 mm (M8)
Kinematic Fixture Plate 400x400x16 mm (M8)
ID: KPT-400__400
Precio:  1.588,00 CHF
Descripción rápida:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Referencia:  KPT-400/400
  • Compatibilidad placas:  KB-300/300, KB-UNIVL
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Precio:  660,00 CHF
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-250/250
  • Compatibilidad placas:  KPP-300/300, KPT-300/300
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 400x400mm
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Precio:  768,00 CHF
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-300/300
  • Compatibilidad placas:  KPP-400/400, KPT-400/400
En Stock - Envío 1-2 Días