text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  480,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  560,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  33,00 €
Descripción rápida:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Referencia:  FX-CTSML
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  47,00 €
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  279,00 €
Descripción rápida:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  10,00 €
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Longitud:  20 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  84,00 €
Descripción rápida:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Referencia:  FX-PR30HINGE
En Stock - Envío 1-2 Días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  33,00 €
Descripción rápida:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Referencia:  FX-CTMED
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  819,00 €
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/300
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  33,00 €
Descripción rápida:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Referencia:  FX-M8SPRGNUT
En Stock - Envío 1-2 Días
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Precio:  27,00 €
Descripción rápida:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Referencia:  FX-POST
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  18,00 €
Descripción rápida:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Referencia:  FV-SOSUP
  • Longitud:  6 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Precio:  1.145,00 €
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP400/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Precio:  1.020,00 €
Descripción rápida:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Referencia:  FX-PILLAR/KIT
En Stock - Envío 1-2 Días
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Precio:  62,00 €
Descripción rápida:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Referencia:  FX-HEIGHT
  • Longitud:  50 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Precio:  1.955,00 €
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP400/600
  • Rosca:  M8
En Stock - Envío 1-2 Días
Centering Pin
Centering Pin
ID: FV-MALE
Precio:  24,00 €
Descripción rápida:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Referencia:  FV-MALE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Precio:  6,00 €
Descripción rápida:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Referencia:  FX-BPRTR
  • Rosca:  M8
En Stock - Envío 1-2 Días
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  1.254,00 €
Descripción rápida:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FV-STARTERKIT
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Precio:  10,00 €
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/15
  • Longitud:  15 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días