text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  zł5,098.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125SS3
  • Diámetro exterior mandril (D1):  125mm
  • Area de fijación exterior (A):  1 - 126mm
  • Area de fijación interior (I):  32 - 122mm
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Precio:  zł5,098.00
Descripción rápida:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125mm
  • Area de fijación:  5 - 156mm
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Precio:  zł4,795.00
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125mm
  • Area de fijación:  5 - 156mm
  • Material:  Aluminio
  • Fijación (G):  M5
Tiempo de entrega 10-15 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  zł3,888.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  zł138.00
Descripción rápida:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Referencia:  FV-FEMALE
En Stock - Envío 1-2 Días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  zł199.00
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  zł43.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Longitud:  20 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Precio:  zł91.00
Descripción rápida:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Referencia:  FV-CONEADJ
  • Rosca:  M4
En Stock - Envío 1-2 Días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  zł3,240.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/300
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Precio:  zł164.00
Descripción rápida:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Referencia:  FV-LATSML
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Precio:  zł43.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/25
  • Longitud:  25 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  zł73.00
Descripción rápida:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Referencia:  FV-SOSUP
  • Longitud:  6 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Precio:  zł2,333.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200P
  • Rosca:  M4
En Stock - Envío 1-2 Días
Centering Pin
Centering Pin
ID: FV-MALE
Precio:  zł99.00
Descripción rápida:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Referencia:  FV-MALE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  zł4,925.00
Descripción rápida:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FV-STARTERKIT
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Precio:  zł43.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/15
  • Longitud:  15 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Precio:  zł9,936.00
Descripción rápida:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FV-FULLKIT
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
En Stock - Envío 1-2 Días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  zł1,758.00
Descripción rápida:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Referencia:  FV-SLIDE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  zł2,376.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
En Stock - Envío 1-2 Días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  zł91.00
Descripción rápida:  The angle block slider enables users to position elements horizontally on the base plate.
  • Referencia:  FV-ANGSLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días