text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  436,00 £
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  509,00 £
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
Support Stop
Support Stop
ID: FX-SUP__STOP
Precio:  79,00 £
Descripción rápida:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Referencia:  FX-SUP/STOP
  • Rosca:  M8
En Stock - Envío 1-2 Días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  913,00 £
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  30,00 £
Descripción rápida:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Referencia:  FX-CTSML
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Precio:  17,00 £
Descripción rápida:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Referencia:  FX-CAPM8/16
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Precio:  20,00 £
Descripción rápida:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Referencia:  FX-SO/MAG
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Precio:  20,00 £
Descripción rápida:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Referencia:  FX-CONE
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  45,00 £
Descripción rápida:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Referencia:  FX-PR30PLATE
  • Tamaño:  130 x 30 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  1.493,00 £
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP500/500
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  36,00 £
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/100
  • Tamaño:  30 x 30 x 100 mm
En Stock - Envío 1-2 Días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  45,00 £
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Referencia:  FX-PR30/250
  • Tamaño:  30 x 30 x 250 mm
En Stock - Envío 1-2 Días
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Precio:  35,00 £
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/50
  • Tamaño:  30 x 30 x 50 mm
En Stock - Envío 1-2 Días
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Precio:  5.233,00 £
Descripción rápida:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Referencia:  GB0096-2001
  • Compatibilidad CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilidad del software:  PC-DMIS (V2016 y superiores) , QUINDOS (Q7R18351 y superiores)
  • Tiempos de ejecución:  Comprobación de longitud: 20 Minutos, Comprobación de anillo: 5 Minutos, Comprobación de esfera: 5 Minutos, Comprobación del cabezal indexable / sensor: 10 Minutos
  • Dimensiones:  Barra de longitud = 300 mm, Diametro del anillo = 25 mm, Diametro de la esfera = 25 mm
Entrega > 25 días
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Precio:  7.773,00 £
Descripción rápida: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Referencia:  GB0122-1000
  • Compatibilidad:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Entrega > 25 días
Kinematic Base for Fixture Plate 400x400mm
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Precio:  698,00 £
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-300/300
  • Compatibilidad placas:  KPP-400/400, KPT-400/400
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 400x400mm (Plain)
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Precio:  591,00 £
Descripción rápida:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Referencia:  KPP-400/400
  • Compatibilidad placas:  KB-300/300, KB-UNIVL
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 500x500x16 mm (M8)
Kinematic Fixture Plate 500x500x16 mm (M8)
ID: KPT-500__500
Precio:  1.865,00 £
Descripción rápida:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Referencia:  KPT-500/500
  • Compatibilidad placas:  KB-400/400, KB-UNIVL
En Stock - Envío 1-2 Días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  30,00 £
Descripción rápida:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Referencia:  FV-FEMALE
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  254,00 £
Descripción rápida:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días