As part of our new security upgrades, you are requested to reset your password
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
PLN 728.50
In Stock - Despatched 1-2 Days
Stylus changer port for scanning sensor HP-S-X3.
Port Quantity | 1 |
Related Probe | HP-S-X3 |
PLN 1,687.30
In Stock - Despatched 1-2 Days
Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
Port Quantity | 1 |
Related Probe |
HP-S-X1S HP-S-X1H HP-S-X1C |
PLN 1,052.80
In Stock - Despatched 1-2 Days
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Plate Compatibility |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
PLN 89.30
In Stock - Despatched 1-2 Days
The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
Length | 10 mm |
Diameter | 15 mm |
PLN 1,038.70
In Stock - Despatched 1-2 Days
Standard base with standard cylinder, standard fixation piece and mounting equipment
PLN 7,238.00
In Stock - Despatched 1-2 Days
Kit with accurate base
and crash protection
PLN 267.90
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Length | 20 mm |
Diameter | 20 mm |
PLN 14,852.00
Delivery time 10-15 days
Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
Outside Diameter Chuck (D1) | 240 mm |
Clamping Range Outside (A) | 1 - 288 mm |
Clamping Range Inside (I) | 35 - 295 mm |
Fixing (G) | M8 |
PLN 3,384.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Plate Compatibility |
KB-400/400 KB-UNIVL |
PLN 136.30
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Thread | Without Thread |
PLN 141.00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Length | 10 mm |
Diameter | 8 mm |
PLN 4,324.00
In Stock - Despatched 1-2 Days
The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Thread | M8 |
Application |
CMM Portable Measuring Arm |
PLN 112.80
In Stock - Despatched 1-2 Days
This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
Thread | M8 |
PLN 70.50
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Length | 20 mm |
Diameter | 20 mm |
PLN 4,042.00
In Stock - Despatched 1-2 Days
The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
Thread | M4 |
Application | Multisensor CMM |
PLN 404.20
In Stock - Despatched 1-2 Days
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
Thread | M8 |
PLN 70.50
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Length | 30 mm |
Diameter | 16 mm |
PLN 108.10
In Stock - Despatched 1-2 Days
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
Thread | M8 |
PLN 371.30
In Stock - Despatched 1-2 Days
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
Thread | M8 |
PLN 206.80
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Thread | M4 |
Added to your shopping cart.
Product availability by store location
Hours