Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

Vee Locator
Vee Locator
ID: FV-FEMALE
Price:  zł142.00
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
In Stock - Despatched 1-2 Days
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Price:  zł202.00
Quick Overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
In Stock - Despatched 1-2 Days
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Price:  zł95.00
Quick Overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  zł361.00
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
In Stock - Despatched 1-2 Days
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Price:  zł142.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Part Number:  FX-CTMED
  • Thread:  Without Thread
In Stock - Despatched 1-2 Days
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Price:  zł142.00
Quick Overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
In Stock - Despatched 1-2 Days
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Price:  zł185.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/150
  • Size:  30 x 30 x 150 mm
In Stock - Despatched 1-2 Days
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Price:  zł116.00
Quick Overview:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Part Number:  FX-POST
  • Thread:  M8
In Stock - Despatched 1-2 Days
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Price:  zł4,386.00
Quick Overview:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Part Number:  FX-PILLAR/KIT
In Stock - Despatched 1-2 Days
Centering Pin
Centering Pin
ID: FV-MALE
Price:  zł103.00
Quick Overview:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Part Number:  FV-MALE
  • Thread:  M4
In Stock - Despatched 1-2 Days
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Price:  zł82.00
Quick Overview:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Part Number:  FX-CAPM8/16
  • Thread:  M8
In Stock - Despatched 1-2 Days
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Price:  zł1,806.00
Quick Overview:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Part Number:  FV-SLIDE
  • Thread:  M4
In Stock - Despatched 1-2 Days
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Price:  zł82.00
Quick Overview:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Part Number:  FX-CAPM8/20
  • Thread:  M8
In Stock - Despatched 1-2 Days
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Price:  zł95.00
Quick Overview:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FX-CONE
  • Thread:  M8
In Stock - Despatched 1-2 Days
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Price:  zł211.00
Quick Overview:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Part Number:  FX-PR30PLATE
  • Size:  130 x 30 mm
In Stock - Despatched 1-2 Days
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Price:  zł95.00
Quick Overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
In Stock - Despatched 1-2 Days
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Price:  zł172.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/100
  • Size:  30 x 30 x 100 mm
In Stock - Despatched 1-2 Days
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Price:  zł211.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Part Number:  FX-PR30/250
  • Size:  30 x 30 x 250 mm
In Stock - Despatched 1-2 Days
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Price:  zł163.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/50
  • Size:  30 x 30 x 50 mm
In Stock - Despatched 1-2 Days
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Price:  zł112.00
Quick Overview:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FX-SLIDER
  • Thread:  M8
In Stock - Despatched 1-2 Days