text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP

WMP

Ceramic Calibration Sphere (D = 15.875 mm)
Ceramic Calibration Sphere (D = 15.875 mm)
ID: G39002200
Cena:  €462.00
Szybki Podgląd: 

Calibration sphere (Ø15.875 mm) made out of ceramic with M8 thread for use of CMMs.
  • Part Number:  G39002200
  • Sphere Material:  Ceramic
  • Sphere Diameter:  15.875mm
  • External Thread:  M8
Czas dostawy 10-15 dni
Ceramic Calibration Sphere Kit (D = 15 mm)
Ceramic Calibration Sphere Kit (D = 15 mm)
ID: G39031401
Cena:  €776.00
Szybki Podgląd: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
  • Part Number:  G39031401
  • Sphere Material:  Ceramic
  • Sphere Diameter:  15mm
  • External Thread:  M8
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  €480.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  €560.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Czas dostawy 10-15 dni
Angular Adapter Set TKJ (4 pc.)
Angular Adapter Set TKJ (4 pc.)
ID: 03969394
Cena:  €3,290.00
Szybki Podgląd:  Set of 4 TKJ angular adapters (0°, 30°, 60°, 90°) made of aluminium and stainless steel. To be used only with HP-L-10.6.
  • Part Number:  03969394
  • Connection:  TKJ / TKJ
  • Length (L):  34mm
  • Angle:  0° / 30° / 60° / 90°
  • Material:  Aluminium / Stainless Steel
Dostawy > 25 dni
HA-TT-A30 Angular Adapter DEG30
HA-TT-A30 Angular Adapter DEG30
ID: 03969391
Cena:  €940.00
Szybki Podgląd:  TKJ angular adapter 30° made of aluminium and stainless steel
  • Part Number:  03969391
  • Connection:  TKJ / TKJ
  • Length (L):  35mm
  • Angle:  30°
  • Material:  Aluminium / Stainless Steel
Dostawy > 25 dni
HR-MP6-90 Probe Module Changer Rack
HR-MP6-90 Probe Module Changer Rack
ID: 03939481
Cena:  €2,400.00
Szybki Podgląd:  6-port probe module changer rack with a height of 90 mm
  • Part Number:  03939481
  • Port Quantity:  6
  • Height:  88mm
Dostawy > 25 dni
HR-MP-A3 3-Port Module Changer Kit for HR-R RACK
HR-MP-A3 3-Port Module Changer Kit for HR-R RACK
ID: 03939483
Cena:  €1,040.00
Szybki Podgląd:  HR-MP-A3 3-port module with adapter for HR-R Rack. Compatible with HP-THD, HP-TM and HP-TMe probe modules.
  • Part Number:  03939483
  • Port Quantity:  3
  • Related Probe:  HP-TM, HP-TMe, HP-THD
W magazynie - wysyłka w ciągu 1-2 dni
HP-TMe-LF Probe Module (Low Force)
HP-TMe-LF Probe Module (Low Force)
ID: 03939301
Cena:  €1,140.00
Szybki Podgląd:  Low force probe module of the compact 5-way touch trigger probe HP-TMe.
  • Part Number:  03939301
  • Related Probe:  HP-TMe
  • Probe Body Compatibility:  HP-TB, HP-TBe
  • Probing Directions:  ± X, ± Y, +Z
  • Stylus Mounting:  M2
W magazynie - wysyłka w ciągu 1-2 dni
HA-M-100 Probe Extension M8 (L = 100 mm)
HA-M-100 Probe Extension M8 (L = 100 mm)
ID: 03969066
Cena:  €263.00
Szybki Podgląd:  M8/M8 extension made of aluminium and stainless steel with a length of 100 mm.
  • Part Number:  03969066
  • Connection:  M8 / M8
  • Length (L):  100mm
  • Material:  Aluminium / Stainless Steel
W magazynie - wysyłka w ciągu 1-2 dni
HR-SP-160 Rack Extension (L = 160 mm)
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Cena:  €173.00
Szybki Podgląd:  Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.
  • Part Number:  03969487
  • Length:  160mm
  • Diameter:  19.5mm
Dostawy > 25 dni
Hexagon Diaclean (1 l)
Hexagon Diaclean (1 l)
ID: 8070-01001
Cena:  €20.00
Szybki Podgląd:  Surface cleaner for Coordinate Measuring Machines (CMM).
  • Part Number:  8070-01001
W magazynie - wysyłka w ciągu 1-2 dni
Ceramic Calibration Sphere (D = 15 mm)
Ceramic Calibration Sphere (D = 15 mm)
ID: C55918028
Cena:  €336.00
Szybki Podgląd: 

Calibration sphere (Ø15 mm) made out of ceramic with an M8 thread for use of CMMs.
  • Part Number:  C55918028
  • Sphere Material:  Ceramic
  • Sphere Diameter:  15mm
  • External Thread:  M8
Czas dostawy 10-15 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Cena:  €1,220.00
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Cena:  €1,220.00
Szybki Podgląd:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Cena:  €1,490.00
Szybki Podgląd:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Fixing:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Cena:  €1,490.00
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Cena:  €940.00
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Cena:  €930.00
Szybki Podgląd: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing (G):  M3
Czas dostawy 10-15 dni
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Cena:  €1,420.00
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing (G):  M6
Czas dostawy 10-15 dni