Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

  • 1(current)
  • 2
  • 3
103 Product(s) found
  • Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern ID: FV-BP200__200P
    €275.00

    In Stock - Despatched 1-2 Days

    Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
    Thread M4 
  • Fixture Baseplate 400x600x12mm (M8) Fixture Baseplate 400x600x12mm (M8) ID: FX-BP400__600
    €1,804.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Cap Screw Set M8 (L = 16 mm) Cap Screw Set M8 (L = 16 mm) ID: FX-CAPM8__16
    €18.00

    In Stock - Despatched 1-2 Days

    Cap screws are used to mount Swift-Fix components on the base plate.
    Thread M8 
  • Kinematic Base for Fixture Plate 500x500mm Kinematic Base for Fixture Plate 500x500mm ID: KB-400__400
    €869.00

    In Stock - Despatched 1-2 Days

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plate Compatibility KPP-500/500 
    KPT-500/500 
  • Pillar 30x30x100mm Pillar 30x30x100mm ID: FX-PR30__100
    €40.00

    In Stock - Despatched 1-2 Days

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 100 mm 
  • Pillar 30x30x250mm Pillar 30x30x250mm ID: FX-PR30__250
    €50.00

    In Stock - Despatched 1-2 Days

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
    Size 30 x 30 x 250 mm 
  • Pillar 30x30x50mm Pillar 30x30x50mm ID: FX-PR30__50
    €38.00

    In Stock - Despatched 1-2 Days

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 50 mm 
  • Swift-Fix - Basic Kit Swift-Fix - Basic Kit ID: FX-BASIC__KIT
    €473.00

    In Stock - Despatched 1-2 Days

    The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
    Thread M8 
    Application CMM 
    Portable Measuring Arm 
  • Kinematic Fixture Plate 400x400mm (Plain) Kinematic Fixture Plate 400x400mm (Plain) ID: KPP-400__400
    €616.00

    In Stock - Despatched 1-2 Days

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Plate Compatibility KB-300/300 
    KB-UNIVL 
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    €44.00

    In Stock - Despatched 1-2 Days

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    €10.00

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 20 mm 
    Diameter 8 mm 
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    €32.00

    In Stock - Despatched 1-2 Days

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Thread Without Thread 
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    €57.00

    In Stock - Despatched 1-2 Days

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Size 120 x 45 x 12 mm 
  • Pillar Kit Pillar Kit ID: FX-PILLAR__KIT
    €1,023.00

    In Stock - Despatched 1-2 Days

    The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Cap Screw Set M8 (L = 20 mm) Cap Screw Set M8 (L = 20 mm) ID: FX-CAPM8__20
    €18.00

    In Stock - Despatched 1-2 Days

    Cap screws are used to mount Swift-Fix components on the base plate.
    Thread M8 
  • Swift-Fix - Gold Kit Swift-Fix - Gold Kit ID: FX-GOLD__KIT
    €2,552.00

    In Stock - Despatched 1-2 Days

    With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Thread M8 
    Application CMM 
    Portable Measuring Arm 
  • Acryl Baseplate 200x200x10mm (M4) - Cross Pattern Acryl Baseplate 200x200x10mm (M4) - Cross Pattern ID: FV-BP200__200C
    €275.00

    In Stock - Despatched 1-2 Days

    Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
    Thread M4 
  • Fixture Baseplate 600x600x12mm (M8) Fixture Baseplate 600x600x12mm (M8) ID: FX-BP600__600
    €1,903.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Kinematic Base for Fixture Plate 300x300mm Kinematic Base for Fixture Plate 300x300mm ID: KB-250__250
    €616.00

    In Stock - Despatched 1-2 Days

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plate Compatibility KPP-300/300 
    KPT-300/300 
  • Pillar 30x30x200mm Pillar 30x30x200mm ID: FX-PR30__200
    €47.00

    In Stock - Despatched 1-2 Days

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 200 mm 
    • 1(current)
    • 2
    • 3