text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  €480.00
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  €560.00
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Livraison sous 10 à 15 jours
Pillar Kit
Pillar Kit
N° : FX-PILLAR__KIT
Prix:  €1,020.00
Vue d'ensemble sommaire:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Part Number:  FX-PILLAR/KIT
En stock - Livraison sous 1 à 2 jours
Standoff Support (M8)
Standoff Support (M8)
N° : FX-SO__SUPP
Prix:  €22.00
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Part Number:  FX-SO/SUPP
  • Length:  10 mm
  • Diameter:  15 mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
N° : FX-SO20__30
Prix:  €18.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO20/30
  • Length:  30 mm
  • Diameter:  20 mm
En stock - Livraison sous 1 à 2 jours
Universal Joint
Universal Joint
N° : FX-UNI__JOINT
Prix:  €95.00
Vue d'ensemble sommaire:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Part Number:  FX-UNI/JOINT
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Vee Locator
Vee Locator
N° : FX-VEE
Prix:  €77.00
Vue d'ensemble sommaire:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Part Number:  FX-VEE
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
N° : FX-SO__MAG
Prix:  €22.00
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FX-SO/MAG
  • Length:  20 mm
  • Diameter:  16 mm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x250mm
Pillar 30x30x250mm
N° : FX-PR30__250
Prix:  €49.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Part Number:  FX-PR30/250
  • Size:  30 x 30 x 250 mm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x50mm
Pillar 30x30x50mm
N° : FX-PR30__50
Prix:  €38.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/50
  • Size:  30 x 30 x 50 mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
N° : FX-SO16__30
Prix:  €18.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/30
  • Length:  30 mm
  • Diameter:  16 mm
En stock - Livraison sous 1 à 2 jours
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
N° : FX-SO__PIN
Prix:  €22.00
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FX-SO/PIN
  • Length:  20 mm
  • Diameter:  16 mm
En stock - Livraison sous 1 à 2 jours
Slider Block (M8)
Slider Block (M8)
N° : FX-SLIDER
Prix:  €26.00
Vue d'ensemble sommaire:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FX-SLIDER
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x200mm
Pillar 30x30x200mm
N° : FX-PR30__200
Prix:  €46.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/200
  • Size:  30 x 30 x 200 mm
En stock - Livraison sous 1 à 2 jours
Toggle Clamp
Toggle Clamp
N° : FX-TOG
Prix:  139,00 CHF
Vue d'ensemble sommaire:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Part Number:  FX-TOG
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
SWIFT-CHECK
SWIFT-CHECK
N° : GB0096-2001
Prix:  5 756,00 CHF
Vue d'ensemble sommaire:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Part Number:  GB0096-2001
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Livraison > 25 jours
SWIFT-SET
SWIFT-SET
N° : GB0122-1000
Prix:  8 550,00 CHF
Vue d'ensemble sommaire: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Livraison > 25 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
N° : FC-125SS3
Prix:  1 220,00 CHF
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
N° : FC-125AL6
Prix:  1 318,00 CHF
Vue d'ensemble sommaire:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
N° : FC-160AL6
Prix:  1 565,00 CHF
Vue d'ensemble sommaire:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours