Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

  • 1(current)
  • 2
  • 3
106 Product(s) found
  • 6-Jaw Chuck without Flange (Aluminium / D=160 mm) 6-Jaw Chuck without Flange (Aluminium / D=160 mm) ID: FC-160AL6-NF
    €1,430.00

    Delivery time 10-15 days

    Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range 5 - 196 mm
    Fixing (G) M6 
  • Kinematic Base for Fixture Plate 500x500mm Kinematic Base for Fixture Plate 500x500mm ID: KB-400__400
    €790.00

    In Stock - Despatched 1-2 Days

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plate Compatibility KPP-500/500 
    KPT-500/500 
  • Universal Kinematic Fixture Base Universal Kinematic Fixture Base ID: KB-UNIVL
    €560.00

    In Stock - Despatched 1-2 Days

    The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
    Plate Compatibility KPP-300/300 
    KPT-300/300 
    KPP-400/400 
    KPT-400/400 
    KPP-500/500 
    KPT-500/500 
  • Pillar Base Plate Pillar Base Plate ID: FX-PR30PLATE
    €45.00

    In Stock - Despatched 1-2 Days

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Size 130 x 30 mm 
  • Pillar 30x30x50mm Pillar 30x30x50mm ID: FX-PR30__50
    €34.00

    In Stock - Despatched 1-2 Days

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 50 mm 
  • Fixture Baseplate 600x600x12mm (M8) Fixture Baseplate 600x600x12mm (M8) ID: FX-BP600__600
    €1,730.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Kinematic Support Kit Plus Kinematic Support Kit Plus ID: FX-KINKITPLUS
    €250.00

    In Stock - Despatched 1-2 Days

    The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
    Plate Compatibility KB-UNIVL 
  • 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) 3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) ID: FC-125SS3
    €1,160.00

    In Stock - Despatched 1-2 Days

    Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 125 mm
    Clamping Range Outside (A) 1 - 126 mm
    Clamping Range Inside (I) 32 - 122 mm
    Fixing M4 / M8 
  • 3-Jaw Chuck without Flange (Stainless Steel / D=160 mm) 3-Jaw Chuck without Flange (Stainless Steel / D=160 mm) ID: FC-160SS3-NF
    €1,360.00

    Delivery time 10-15 days

    Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range Outside (A) 1 - 150 mm
    Clamping Range Inside (I) 34 - 174 mm
    Fixing (G) M6 
  • Fixture Baseplate 300x400x12mm (M8) Fixture Baseplate 300x400x12mm (M8) ID: FX-BP300__400
    €840.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    €40.00

    In Stock - Despatched 1-2 Days

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    €29.00

    In Stock - Despatched 1-2 Days

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Thread Without Thread 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    €22.00

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 100 mm 
    Diameter 16 mm 
  • Standoff (D = 20 mm / L = 100 mm) Standoff (D = 20 mm / L = 100 mm) ID: FX-SO20__100
    €23.00

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 100 mm 
    Diameter 20 mm 
  • Cap Screw Set M8 (L = 20 mm) Cap Screw Set M8 (L = 20 mm) ID: FX-CAPM8__20
    €16.00

    In Stock - Despatched 1-2 Days

    Cap screws are used to mount Swift-Fix components on the base plate.
    Thread M8 
  • Swift-Fix - Gold Kit Swift-Fix - Gold Kit ID: FX-GOLD__KIT
    €2,320.00

    In Stock - Despatched 1-2 Days

    With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Thread M8 
    Application CMM 
    Portable Measuring Arm 
  • Acryl Baseplate 200x200x10mm (M4) - Cross Pattern Acryl Baseplate 200x200x10mm (M4) - Cross Pattern ID: FV-BP200__200C
    €250.00

    In Stock - Despatched 1-2 Days

    Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
    Thread M4 
  • Fixture Baseplate 500x500x12mm (M8) Fixture Baseplate 500x500x12mm (M8) ID: FX-BP500__500
    €1,380.00

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Kinematic Base for Fixture Plate 400x400mm Kinematic Base for Fixture Plate 400x400mm ID: KB-300__300
    €610.00

    In Stock - Despatched 1-2 Days

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plate Compatibility KPP-400/400 
    KPT-400/400 
  • 6-Jaw Chuck without Flange (Aluminium / D=125 mm) 6-Jaw Chuck without Flange (Aluminium / D=125 mm) ID: FC-125AL6-NF
    €1,090.00

    Delivery time 10-15 days

    Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 125 mm
    Clamping Range 5 - 156 mm
    Fixing (G) M5 
    • 1(current)
    • 2
    • 3