text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM

CMM

HA-M Probe Extension Kit M8
HA-M Probe Extension Kit M8
ID: 03969077
Prijs:  €821.00
Beknopt overzicht:  Kit of three M8 Extensions (50 mm, 100 mm and 200 mm) made of aluminium and stainless steel.
  • Part Number:  03969077
  • Connection:  M8 / M8
  • Material:  Aluminium / Stainless Steel
Op voorraad - verzending 1-2 dagen
HA-TT-100 Probe Extension TKJ (L = 100 mm)
HA-TT-100 Probe Extension TKJ (L = 100 mm)
ID: 03969361
Prijs:  €1,253.00
Beknopt overzicht:  TKJ extension made of aluminium and stainless steel with a length of 100 mm.
  • Part Number:  03969361
  • Connection:  TKJ / TKJ
  • Length (L):  100
  • Material:  Aluminium / Stainless Steel
Op voorraad - verzending 1-2 dagen
HR-SP-110 Rack Extension (L = 110 mm)
HR-SP-110 Rack Extension (L = 110 mm)
ID: 03969486
Prijs:  €173.00
Beknopt overzicht:  Sensor module rack extension to lift up HR-MP racks to a total height of 200 mm. Length 110 mm.
  • Part Number:  03969486
  • Length:  110
  • Diameter:  19.5
Levertijd > 25 dagen
HR-SP-160 Rack Extension (L = 160 mm)
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Prijs:  €173.00
Beknopt overzicht:  Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.
  • Part Number:  03969487
  • Length:  160
  • Diameter:  19.5
Levertijd > 25 dagen
Safety Pin for HR-MP Rack
Safety Pin for HR-MP Rack
ID: 03969488
Prijs:  €52.00
Beknopt overzicht:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Part Number:  03969488
  • Length:  22
  • Diameter:  8
Levertijd > 25 dagen
HR-SP-60 Rack Extension (L = 60 mm)
HR-SP-60 Rack Extension (L = 60 mm)
ID: 03969485
Prijs:  €173.00
Beknopt overzicht:  Sensor module rack extension to lift up HR-MP racks to a total height of 150 mm. Length 60 mm.
  • Part Number:  03969485
  • Length:  60
  • Diameter:  19.5
Levertijd > 25 dagen
HR-MP6-150 Module Rack with HP-TMe Probe Kit 2
HR-MP6-150 Module Rack with HP-TMe Probe Kit 2
ID: 03939574
Prijs:  €4,400.00
Beknopt overzicht:  Kit consisting of a 6-Port probe module changer rack (H = 150 mm) and a HP-TMe probe kit 2 (1x HP-TBe Probe Body, 2x HP-TMe-SF Probe Module).
  • Part Number:  03939574
  • Port Quantity:  6
  • Height:  150
  • Kit Content:  1x HR-MP6-150 Probe Module Rack, 1x HP-TBe Probe Body, 2x HP-TMe-SF Probe Module
Levertijd > 25 dagen
Hexagon Diaclean (1 l)
Hexagon Diaclean (1 l)
ID: 8070-01001
Prijs:  €20.00
Beknopt overzicht:  Surface cleaner for Coordinate Measuring Machines (CMM).
  • Part Number:  8070-01001
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Prijs:  €1,318.00
Beknopt overzicht: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Prijs:  €1,140.00
Beknopt overzicht: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing (G):  M5
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  €1,004.00
Beknopt overzicht: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Part Number:  FX-BP300/400
  • Thread:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  €33.00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
Op voorraad - verzending 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  €47.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  €279.00
Beknopt overzicht: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  €10.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/20
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  20 mm
Op voorraad - verzending 1-2 dagen
Adjustable Cone (M4)
Adjustable Cone (M4)
ID: FV-CONEADJ
Prijs:  €22.00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  zł 3.522,00
Beknopt overzicht: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Part Number:  FX-BP300/300
  • Thread:  M8
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
ID: FV-LATSML
Prijs:  zł 168,00
Beknopt overzicht: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.
  • Part Number:  FV-LATSML
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  10 mm
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  zł 43,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/25
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  25 mm
Op voorraad - verzending 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  zł 77,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Part Number:  FV-SOSUP
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  6 mm
Op voorraad - verzending 1-2 dagen