Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

  • 1(current)
  • 2
  • 3
103 Product(s) found
  • 3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm) 3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm) ID: FC-160SS3
    1 318,00 £

    In Stock - Despatched 1-2 Days

    Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range Outside (A) 1 - 150 mm
    Clamping Range Inside (I) 34 - 174 mm
    Material Stainless Steel 
    Fixing M4 / M8 
  • 3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm) 3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm) ID: FC-70SS3
    840,00 £

    In Stock - Despatched 1-2 Days

    Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 70 mm
    Clamping Range Outside (A) 1 - 71 mm
    Clamping Range Inside (I) 18 - 66 mm
    Material Stainless Steel 
    Fixing M4 / M8 
  • 3-Jaw Chuck without Flange (Stainless Steel / D=70 mm) 3-Jaw Chuck without Flange (Stainless Steel / D=70 mm) ID: FC-70SS3-NF
    810,00 £

    Delivery time 10-15 days

    Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 70 mm
    Clamping Range Outside (A) 1 - 71 mm
    Clamping Range Inside (I) 18 - 66 mm
    Material Stainless Steel 
    Fixing (G) M3 
  • 3-Jaw Chuck without Flange (Stainless Steel / D=160 mm) 3-Jaw Chuck without Flange (Stainless Steel / D=160 mm) ID: FC-160SS3-NF
    1 250,00 £

    Delivery time 10-15 days

    Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range Outside (A) 1 - 150 mm
    Clamping Range Inside (I) 34 - 174 mm
    Material Stainless Steel 
    Fixing (G) M6 
  • 6-Jaw Chuck without Flange (Aluminium / D=125 mm) 6-Jaw Chuck without Flange (Aluminium / D=125 mm) ID: FC-125AL6-NF
    1 006,00 £

    Delivery time 10-15 days

    Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 125 mm
    Clamping Range 5 - 156 mm
    Material Aluminium 
    Fixing (G) M5 
  • 6-Jaw Chuck without Flange (Aluminium / D=160 mm) 6-Jaw Chuck without Flange (Aluminium / D=160 mm) ID: FC-160AL6-NF
    1 250,00 £

    Delivery time 10-15 days

    Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 160 mm
    Clamping Range 5 - 196 mm
    Material Aluminium 
    Fixing (G) M6 
  • 3-Jaw Chuck without Flange (Aluminium / D=240 mm) 3-Jaw Chuck without Flange (Aluminium / D=240 mm) ID: FC-240AL3-NF
    2 919,00 £

    Delivery time 10-15 days

    Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 240 mm
    Clamping Range Outside (A) 1 - 288 mm
    Clamping Range Inside (I) 35 - 295 mm
    Material Aluminium 
    Fixing (G) M8 
  • 3-Jaw Chuck without Flange (Stainless Steel / D=125 mm) 3-Jaw Chuck without Flange (Stainless Steel / D=125 mm) ID: FC-125SS3-NF
    1 006,00 £

    Delivery time 10-15 days

    Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Outside Diameter Chuck (D1) 125 mm
    Clamping Range Outside (A) 1 - 126 mm
    Clamping Range Inside (I) 32 - 122 mm
    Material Stainless Steel 
    Fixing (G) M5 
  • Kinematic Fixture Plate 300x300mm (Plain) Kinematic Fixture Plate 300x300mm (Plain) ID: KPP-300__300
    435,00 £

    In Stock - Despatched 1-2 Days

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Plate Compatibility KB-250/250 
    KB-UNIVL 
  • Fixture Baseplate 300x400x12mm (M8) Fixture Baseplate 300x400x12mm (M8) ID: FX-BP300__400
    779,00 £

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Kinematic Fixture Plate 500x500mm (Plain) Kinematic Fixture Plate 500x500mm (Plain) ID: KPP-500__500
    667,00 £

    In Stock - Despatched 1-2 Days

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Plate Compatibility KB-400/400 
    KB-UNIVL 
  • Tension Clamp (L = 39 mm) Tension Clamp (L = 39 mm) ID: FX-CTSML
    27,00 £

    In Stock - Despatched 1-2 Days

    Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
    Thread Without Thread 
  • Vee Locator Vee Locator ID: FV-FEMALE
    22,00 £

    In Stock - Despatched 1-2 Days

    Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    37,00 £

    In Stock - Despatched 1-2 Days

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    45,00 £

    In Stock - Despatched 1-2 Days

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Thread Without Thread 
  • Thumb Screw M8 Thumb Screw M8 ID: FX-THUMB
    9,00 £

    In Stock - Despatched 1-2 Days

    With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
    Thread M8 
  • Guide Rail (L = 480 mm) Guide Rail (L = 480 mm) ID: FV-GUIDE480
    208,00 £

    In Stock - Despatched 1-2 Days

    The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
    Plate Compatibility FV-BP200/200C 
    FV-BP200/200F 
    FV-BP200/200P 
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    9,00 £

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 20 mm 
    Diameter 8 mm 
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    12,00 £

    In Stock - Despatched 1-2 Days

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Thread M4 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    14,00 £

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 20 mm 
    Diameter 16 mm 
    • 1(current)
    • 2
    • 3