CMM | Hexagon Manufacturing Intelligence

Slider Block (M4) ID: FV-SLIDER

14,00 €

In Stock - Despatched 1-2 Days

A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Thread

M4

Upgrade Pack to Standard HR-MP3-150L Rack ID: 03939498

500,00 €

In Stock - Despatched 1-2 Days

Rack port holder to upgrade the 3-port probe module rack HR-MP3-150L (03939499) to a 6-Port probe module rack. Height: 150 mm

Crash Protection	No
Automatic Recalibration	No

HR-SP-110 Rack Extension (L = 110 mm) ID: 03969486

166,00 €

In Stock - Despatched 1-2 Days

Sensor module rack extension to lift up HR-MP racks to a total height of 200 mm. Length 110 mm.

Length	110 mm
Diameter	19.5 mm

HR-SP-160 Rack Extension (L = 160 mm) ID: 03969487

166,00 €

In Stock - Despatched 1-2 Days

Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.

Length	160 mm
Diameter	19.5 mm

HR-MP Accurate Base and Crash Protection Kit ID: 03939497

1 540,00 €

In Stock - Despatched 1-2 Days

Kit with accurate base and crash protection

Crash Protection	Yes
Automatic Recalibration	Yes

HR-X3-P Stylus Changer Port ID: M00-114-109-000

155,00 €

In Stock - Despatched 1-2 Days

Stylus changer port for scanning sensor HP-S-X3.

Port Quantity	1
Related Probe	HP-S-X3

HR-X1-P-SF Stylus Changer Port ID: M00-114-167-000

359,00 €

In Stock - Despatched 1-2 Days

Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.

Port Quantity	1
Related Probe	HP-S-X1S HP-S-X1H HP-S-X1C

HR-X1-P Stylus Changer Port ID: M00-114-113-000

214,00 €

In Stock - Despatched 1-2 Days

Stylus changer port for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.

Port Quantity	1
Related Probe	HP-S-X1H HP-S-X1S HP-S-X1C

Kinematic Fixture Plate 500x500mm (Plain) ID: KPP-500__500

720,00 €

In Stock - Despatched 1-2 Days

The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plate Compatibility

KB-400/400
KB-UNIVL

Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML

30,00 €

In Stock - Despatched 1-2 Days

The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Length	10 mm
Diameter	8 mm

Swift-Fix - Bronze Kit ID: FX-BRONZE__KIT

920,00 €

In Stock - Despatched 1-2 Days

The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread	M8
Application	CMM Portable Measuring Arm

Tension Post (M8) ID: FX-POST

24,00 €

In Stock - Despatched 1-2 Days

This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.

Thread

M8

Universal Joint ID: FX-UNI__JOINT

86,00 €

In Stock - Despatched 1-2 Days

Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.

Thread

M8

Slider Block (M8) ID: FX-SLIDER

23,00 €

In Stock - Despatched 1-2 Days

A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.

Thread

M8

Articulated Fixture Arm (M8) ID: FX-ARM

79,00 €

In Stock - Despatched 1-2 Days

The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Thread

M8

Spring Clamp (M4) ID: FV-SPRING

44,00 €

In Stock - Despatched 1-2 Days

Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Thread

M4

HR-SB Standard Base for HR-MP Rack ID: 03939493

221,00 €

In Stock - Despatched 1-2 Days

Standard base with standard cylinder, standard fixation piece and mounting equipment

Crash Protection	No
Automatic Recalibration	No

Safety Pin for HR-MP Rack ID: 03969488

49,00 €

In Stock - Despatched 1-2 Days

Safety / locking pin for the 3-port probe module and arm of the rack

Length	22 mm
Diameter	8 mm

Cleaning Putty ID: 03969650

15,00 €

In Stock - Despatched 1-2 Days

Putty for cleaning dust and dirt from parts, devices and measurement equipment.

3-Jaw Chuck without Flange (Aluminium / D=240 mm) ID: FC-240AL3-NF

3 160,00 €

Delivery time 10-15 days

Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1)	240 mm
Clamping Range Outside (A)	1 - 288 mm
Clamping Range Inside (I)	35 - 295 mm
Material	Aluminium
Fixing (G)	M8