Hexagons COVID-19 Support & Response | Official Statement
Select your country or region
Europe
- Austria
- Belgium
- Croatia
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- United Kingdom
Americas
- United States
€589.00
In Stock - Despatched 1-2 Days
Standard force probe module of the compact 6-way touch-trigger probe HP-THD
Related Probe | HP-THD |
Probing Directions | ± X, ± Y, ± Z |
Probe Mounting | M8 |
Stylus Mounting | M2 |
Max. Stylus Length | 30 mm |
€235.00
In Stock - Despatched 1-2 Days
TKJ to M8 adapter made aluminium and stainless steel with a length of 31 mm
Connection | TKJ / M8 |
Length (L) | 31 mm |
Material | Aluminium / Stainless Steel |
€503.00
In Stock - Despatched 1-2 Days
TKJ extension made of aluminium and stainless steel with a length of 50 mm.
Connection | TKJ / TKJ |
Length (L) | 50 mm |
Material | Aluminium / Stainless Steel |
€235.00
In Stock - Despatched 1-2 Days
Triple stylus changer port for scanning sensor HP-S-X1S.
Port Quantity | 3 |
Related Probe | HP-S-X1S |
€1,482.00
In Stock - Despatched 1-2 Days
TKJ extension made of carbon fibre and stainless steel with a length of 300 mm
Connection | TKJ / TKJ |
Length (L) | 300 mm |
Material | Carbon Fiber / Stainless Steel |
€1,516.00
In Stock - Despatched 1-2 Days
TKJ to M8 adapter made of carbon fibre and stainless steel with a length of 450 mm
Connection | TKJ / M8 |
Length (L) | 450 mm |
Material | Carbon Fiber / Stainless Steel |
€446.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Plate Compatibility |
KB-250/250 KB-UNIVL |
€798.00
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Thread | M8 |
€683.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Plate Compatibility |
KB-400/400 KB-UNIVL |
€28.00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Thread | Without Thread |
€23.00
In Stock - Despatched 1-2 Days
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
€38.00
In Stock - Despatched 1-2 Days
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
€46.00
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Thread | Without Thread |
€9.00
In Stock - Despatched 1-2 Days
With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
Thread | M8 |
€213.00
In Stock - Despatched 1-2 Days
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Plate Compatibility |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
€9.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Length | 20 mm |
Diameter | 8 mm |
€12.00
In Stock - Despatched 1-2 Days
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
Thread | M4 |
€14.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Length | 20 mm |
Diameter | 16 mm |
€43.00
In Stock - Despatched 1-2 Days
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
€28.00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Thread | Without Thread |
Added to your shopping cart.
Product availability by store location
Hours