As part of our new security upgrades, you are requested to reset your password
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
€224.00
In Stock - Despatched 1-2 Days
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Plate Compatibility |
FV-BP200/200C FV-BP200/200F FV-BP200/200P |
€720.00
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
Plate Compatibility |
KB-400/400 KB-UNIVL |
€29.00
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Thread | Without Thread |
€30.00
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Length | 10 mm |
Diameter | 8 mm |
€86.00
In Stock - Despatched 1-2 Days
Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
Thread | M8 |
€23.00
In Stock - Despatched 1-2 Days
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
Thread | M8 |
€79.00
In Stock - Despatched 1-2 Days
The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
Thread | M8 |
€44.00
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Thread | M4 |
€29.00
In Stock - Despatched 1-2 Days
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
€250.00
In Stock - Despatched 1-2 Days
Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
Thread | M4 |
€15.00
In Stock - Despatched 1-2 Days
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Length | 20 mm |
Diameter | 20 mm |
€19.00
In Stock - Despatched 1-2 Days
The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
Thread | M8 |
€18.00
In Stock - Despatched 1-2 Days
The angle block slider enables users to position elements horizontally on the base plate.
Thread | M4 |
€47.00
In Stock - Despatched 1-2 Days
The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
€86.00
In Stock - Despatched 1-2 Days
The spring plunger exerts low forces to hold sensible parts in position.
Thread | M8 |
€24.00
In Stock - Despatched 1-2 Days
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
€45.00
In Stock - Despatched 1-2 Days
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
€51.00
In Stock - Despatched 1-2 Days
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Size | 120 x 45 x 12 mm |
€79.00
In Stock - Despatched 1-2 Days
The support stop allows the user to apply a positive clamping force with variable pressure.
Thread | M8 |
€39.00
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Size | 30 x 30 x 150 mm |
Added to your shopping cart.
Product availability by store location
Hours