Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Price:  €1,318.00
Quick Overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Price:  €1,140.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing (G):  M5
Delivery time 10-15 days
Vee Locator
Vee Locator
ID: FV-FEMALE
Price:  €33.00
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
In Stock - Despatched 1-2 Days
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Price:  €47.00
Quick Overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
In Stock - Despatched 1-2 Days
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  €279.00
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Price:  €10.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/20
  • Length:  20 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Price:  €22.00
Quick Overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Price:  €819.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/300
  • Thread:  M8
In Stock - Despatched 1-2 Days
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Price:  €39.00
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FV-LATSML
  • Length:  10 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Price:  €10.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/25
  • Length:  25 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Price:  €18.00
Quick Overview:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Part Number:  FV-SOSUP
  • Length:  6 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Price:  €594.00
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200P
  • Thread:  M4
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  €1,004.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/400
  • Thread:  M8
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Price:  €50.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
In Stock - Despatched 1-2 Days
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Price:  €11.00
Quick Overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Price:  €18.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/20
  • Length:  20 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  €84.00
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
In Stock - Despatched 1-2 Days
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Price:  €33.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Part Number:  FX-CTMED
  • Thread:  Without Thread
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Price:  €26.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/100
  • Length:  100 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Price:  €33.00
Quick Overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
In Stock - Despatched 1-2 Days