text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Katalog
  3. SMS
  4. Upínání

Upínání

Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prijs:  6,00 €
Beknopt overzicht: 

Retaining screws securely fasten base plates to the machine table and enable precise, repeatable positioning of multiple base plates side by side.
  • Objednávací kód:  FX-BPRTR
  • Závit:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prijs:  1 254,00 €
Beknopt overzicht: 

The Swift-Fix Starter Kit contains the essential components required for fixture applications on multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.
  • Objednávací kód:  FV-STARTERKIT
  • Závit:  M4
  • Určeno pro:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prijs:  10,00 €
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/15
  • Závit:  M4
  • Průměr:  8 mm
  • Délka:  15 mm
Op voorraad - verzending 1-2 dagen
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prijs:  19,00 €
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Objednávací kód:  FX-CAPM8/16
  • Závit:  M8
Op voorraad - verzending 1-2 dagen
Vee Block Single
Vee Block Single
ID: FV-VEE
Prijs:  32,00 €
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Objednávací kód:  FV-VEE
Op voorraad - verzending 1-2 dagen
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prijs:  19,00 €
Beknopt overzicht: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M4 components.
  • Objednávací kód:  FV-POST
  • Závit:  M4
  • Určeno pro:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prijs:  475,00 €
Beknopt overzicht: 

The Swift-Fix Basic Kit provides the essential components required for basic fixture applications. The components are supplied in a sturdy case, keeping them well organized and readily accessible.
  • Objednávací kód:  FX-BASIC/KIT
  • Závit:  M8
  • Určeno pro:  SMS, Přenosné měřicí rameno
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  638,00 €
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Objednávací kód:  FV-BP200/200F
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prijs:  18,00 €
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Objednávací kód:  FV-SLIDER
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  18,00 €
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Objednávací kód:  FV-SO/MAG
  • Závit:  M4
  • Průměr:  8 mm
  • Délka:  10 mm
Op voorraad - verzending 1-2 dagen
Spring Clamp
Spring Clamp
ID: FV-SPRING
Prijs:  46,00 €
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Objednávací kód:  FV-SPRING
  • Závit:  Bez závitu
  • Kompatibilita Tension Post:  FV-POST
  • Určeno pro:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prijs:  15,00 €
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Objednávací kód:  FV-CONE
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Prijs:  418,00 €
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.
  • Objednávací kód:  FC-JS-125SS3-I
  • Materiál:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Prijs:  474,00 €
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.
  • Objednávací kód:  FC-JS-160SS3-I
  • Materiál:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Prijs:  364,00 €
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.
  • Objednávací kód:  FC-JS-70SS3-E
  • Materiál:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Prijs:  474,00 €
Beknopt overzicht: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.
  • Objednávací kód:  FC-JS-160SS3-E
  • Materiál:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Prijs:  830,00 €
Beknopt overzicht: 

Clamping and stop pin set for Hexagon 6-jaw chucks Ø125 mm. Designed for the precise and repeatable positioning of a wide variety of workpieces while providing optimal accessibility during measurement.
  • Objednávací kód:  FC-PS-125AL6
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Prijs:  940,00 €
Beknopt overzicht: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Objednávací kód:  FC-PS-160AL6
Levertijd 10-15 dagen
Basic Jaw Set (Aluminium)
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Prijs:  1 020,00 €
Beknopt overzicht: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø 240 mm.
  • Objednávací kód:  FC-JS-240AL3-I
  • Materiál:  Aluminium with hard coated surface
Levertijd 10-15 dagen
3-Jaw 70 Inside Clamping Set (Stainless Steel)
3-Jaw 70 Inside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-I
Prijs:  364,00 €
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.
  • Objednávací kód:  FC-JS-70SS3-I
  • Materiál:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen