Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Quick overview: Dial gauge with housing Ø40 mm, measuring range 0.2 mm, analogue display with reading in mm. For use with measuring systems on machine tools.
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X12. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plugs. Length: 5 m / 16.4'
Universal connecting cable to transmit measuring signals from Hexagon receivers to Mitsubishi controls. Shielded cable with 3M 10120-3000PE plug and open wires. Length: 6 m / 19.7'
Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
