text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM

CMM

HR-X1-3P Stylus Changer Ports
HR-X1-3P Stylus Changer Ports
ID: M00-114-213-000
Precio:  $398.00
Descripción rápida:  Triple stylus changer port for scanning sensor HP-S-X1S.
  • Part Number:  M00-114-213-000
  • Port Quantity:  3
  • Related Probe:  HP-S-X1S
En Stock - Envío 1-2 Días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  $1,078.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/400
  • Thread:  M8
En Stock - Envío 1-2 Días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  $39.00
Descripción rápida:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Part Number:  FX-CTSML
  • Thread:  Without Thread
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 500x500 mm (Plain)
Kinematic Fixture Plate 500x500 mm (Plain)
ID: KPP-500__500
Precio:  $968.00
Descripción rápida:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-500/500
  • Plate Compatibility :  KB-400/400, KB-UNIVL
En Stock - Envío 1-2 Días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  $57.00
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 300x300 mm (Plain)
Kinematic Fixture Plate 300x300 mm (Plain)
ID: KPP-300__300
Precio:  $638.00
Descripción rápida:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
En Stock - Envío 1-2 Días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  $13.00
Descripción rápida:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
En Stock - Envío 1-2 Días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  $55.00
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  $13.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/20
  • Length:  20 mm
  • Diameter:  8 mm
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  $20.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/20
  • Length:  20 mm
  • Diameter:  16 mm
En Stock - Envío 1-2 Días
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Precio:  22,00 €
Descripción rápida:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
En Stock - Envío 1-2 Días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  84,00 €
Descripción rápida:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
En Stock - Envío 1-2 Días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  33,00 €
Descripción rápida:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Part Number:  FX-CTMED
  • Thread:  Without Thread
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  26,00 €
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/100
  • Length:  100 mm
  • Diameter:  16 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  819,00 €
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/300
  • Thread:  M8
En Stock - Envío 1-2 Días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  33,00 €
Descripción rápida:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
En Stock - Envío 1-2 Días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Precio:  60,00 €
Descripción rápida:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Part Number:  FX-SUB45/120
  • Size:  120 x 45 x 12 mm
En Stock - Envío 1-2 Días
Support Stop
Support Stop
ID: FX-SUP__STOP
Precio:  87,00 €
Descripción rápida:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Part Number:  FX-SUP/STOP
  • Thread:  M8
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 300x300x16 mm (M8)
Kinematic Fixture Plate 300x300x16 mm (M8)
ID: KPT-300__300
Precio:  880,00 €
Descripción rápida:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Part Number:  KPT-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
En Stock - Envío 1-2 Días
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Precio:  39,00 €
Descripción rápida:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FV-LATSML
  • Length:  10 mm
  • Diameter:  8 mm
En Stock - Envío 1-2 Días