Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Quick overview: Dial gauge with housing Ø40 mm, measuring range 0.2 mm, analogue display with reading in mm. For use with measuring systems on machine tools.
Universal connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Fanuc High Speed Skip controls. Shielded cable with M12/F08 plug and open wires. Length: 6 m / 19.7'
Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m / 32.8'
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plug. Length: 15 m / 49.2'
