text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. Máquina Herramienta

Máquina Herramienta

Tool Box 35.20-TB
Tool Box 35.20-TB
ID: 35.20-TB
Precio:  £52.00
Descripción rápida:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Part Number:  35.20-TB
  • Compatibility:  TS35.20
Entrega > 25 días
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Precio:  £518.00
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE115
  • Material:  Carbon Fibre
  • Length:  115
  • Diameter:  25 mm
  • External Thread:  M16x1
Entrega > 25 días
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
ID: 41.00-VE430
Precio:  £527.00
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE430
  • Material:  Carbon Fibre
  • Length:  430
  • Diameter:  25 mm
  • External Thread:  M16x1
Entrega > 25 días
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
ID: 41.00-VE450
Precio:  £527.00
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE450
  • Material:  Carbon Fibre
  • Length:  450
  • Diameter:  25 mm
  • External Thread:  M16x1
Entrega > 25 días
Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
Precio:  £455.00
Descripción rápida:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 18
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Entrega > 25 días
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Precio:  £445.00
Descripción rápida:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 14
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Entrega > 25 días
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
ID: CALIBRATION SET 12
Precio:  £445.00
Descripción rápida:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 12
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Entrega > 25 días
Taper Shank CAT50
Taper Shank CAT50
ID: D28-CAT50-W
Precio:  £234.00
Descripción rápida: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Part Number:  D28-CAT50-W
  • Interface:  D28
Entrega > 25 días
Measuring Unit Extension (L = 50 mm / 1.97")
Measuring Unit Extension (L = 50 mm / 1.97")
ID: 21.00-VE50
Precio:  £164.00
Descripción rápida:  Extension made of stainless steel, Ø25 mm, length 50 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  21.00-VE50
  • Material:  Stainless Steel
  • Length:  50
  • Diameter:  25 mm
  • External Thread:  M16x1
Entrega > 25 días
Analogue Dial Gauge
Analogue Dial Gauge
ID: 3079
Precio:  £188.00
Descripción rápida:  Dial gauge with housing Ø40 mm, measuring range 0.2 mm, analogue display with reading in mm. For use with measuring systems on machine tools.
  • Measurement Technology:  Analogue
  • Part Number:  3079
  • Measuring Unit:  mm
  • Housing Diameter:  40
  • Tip Diameter:  2
Entrega > 25 días
Mounting Pin
Mounting Pin
ID: 0885
Precio:  £12.00
Descripción rápida:  Mounting pin for the safe mounting of styli on measuring systems for machine tools.
  • Part Number:  0885
  • Material:  Stainless Steel
  • Length:  48
  • Diameter:  1.2 / 1.9 mm
Entrega > 25 días
Connecting Cable (L = 2 m / 6.6')
Connecting Cable (L = 2 m / 6.6')
ID: 35.40-ST2-X113
Precio:  £102.00
Descripción rápida: 

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Heidenhain controls with control input X113. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'
  • Part Number:  35.40-ST2-X113
Entrega > 25 días
Connecting Cable (L = 2 m / 6.6')
Connecting Cable (L = 2 m / 6.6')
ID: 35.40-ST2-X13
Precio:  £112.00
Descripción rápida: 

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Heidenhain controls with control input X13. Shielded cable with D-SUB HD/M9 plug and open wires. Length: 2 m / 6.6'
  • Part Number:  35.40-ST2-X13
Entrega > 25 días
Pullstud Type 05/19
Pullstud Type 05/19
ID: AZ-05__19
Precio:  £227.00
Descripción rápida: 

Pull stud with integrated mechanism for activating Hexagon touch probes equipped with taper shanks BT50, CAT50, SK50, SK50 DIN2080.
  • Part Number:  AZ-05/19
  • Thread:  M24
Entrega > 25 días
Cylindrical Shaft for Tool Holder
Cylindrical Shaft for Tool Holder
ID: D20-D20-L60-SW15-B
Precio:  £193.00
Descripción rápida: 

Cylindrical tool holder for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
  • Part Number:  D20-D20-L60-SW15-B
  • Interface:  D20
Entrega > 25 días
Hollow Taper Shank HSK40 Form A
Hollow Taper Shank HSK40 Form A
ID: D20-HSK40A-B
Precio:  £417.00
Descripción rápida: 

Hollow taper shank HSK40 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
  • Part Number:  D20-HSK40A-B
  • Interface:  D20
  • Shape:  A
Entrega > 25 días
Taper Shank BT40 (L = 70 mm / 2.76")
Taper Shank BT40 (L = 70 mm / 2.76")
ID: D20-BT40-70-B
Precio:  £295.00
Descripción rápida: 

Taper shank JIS BT40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm /  2.75"
  • Part Number:  D20-BT40-70-B
  • Interface:  D20
Entrega > 25 días
Pullstud Type 15
Pullstud Type 15
ID: AZ-15
Precio:  £227.00
Descripción rápida: 

Pull stud with integrated mechanism for activating Hexagon touch probes equipped with taper shanks BT50, CAT50, SK50, SK50 DIN2080.
  • Part Number:  AZ-15
  • Thread:  M24
Entrega > 25 días
Hollow Taper Shank HSK32 Form E
Hollow Taper Shank HSK32 Form E
ID: D16-HSK32E-B
Precio:  £275.00
Descripción rápida: 

Hollow taper shank HSK32 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.
  • Part Number:  D16-HSK32E-B
  • Interface:  D16
  • Shape:  E
Entrega > 25 días
Pullstud Type 04/17
Pullstud Type 04/17
ID: AZ-04__17
Precio:  250,00 CHF
Descripción rápida: 

Pull stud with integrated mechanism for activating Hexagon touch probes equipped with SK/CAT40 taper shank.
  • Part Number:  AZ-04/17
  • Thread:  M16
Entrega > 25 días