text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. Bewerkingsmachine

Bewerkingsmachine

Calibration Ball Set 2
Calibration Ball Set 2
ID: 3D-FI EICHKUGEL SET2
Prijs:  $1,575.00
Beknopt overzicht:  Calibration set with calibration sphere (D = 30 mm) and magnetic base for mounting on the machine tool. Set content see description.
  • Part Number:  3D-FI EICHKUGEL SET2
  • Mounting:  Magnetic Mounting
  • Sphere Diameter:  30
Levertijd > 25 dagen
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Prijs:  $571.00
Beknopt overzicht:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 14
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Levertijd > 25 dagen
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
ID: 41.00-VE430
Prijs:  $677.00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE430
  • Material:  Carbon Fibre
  • Length:  430
  • Diameter:  25 mm
  • External Thread:  M16x1
Levertijd > 25 dagen
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
ID: 41.00-VE450
Prijs:  $677.00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE450
  • Material:  Carbon Fibre
  • Length:  450
  • Diameter:  25 mm
  • External Thread:  M16x1
Levertijd > 25 dagen
Taper Shank CAT50
Taper Shank CAT50
ID: D28-CAT50-W
Prijs:  $301.00
Beknopt overzicht: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Part Number:  D28-CAT50-W
  • Interface:  D28
Levertijd > 25 dagen
Tool Box 35.20-TB
Tool Box 35.20-TB
ID: 35.20-TB
Prijs:  $68.00
Beknopt overzicht:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Part Number:  35.20-TB
  • Compatibility:  TS35.20
Levertijd > 25 dagen
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Prijs:  $665.00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE115
  • Material:  Carbon Fibre
  • Length:  115
  • Diameter:  25 mm
  • External Thread:  M16x1
Levertijd > 25 dagen
Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
Prijs:  $583.00
Beknopt overzicht:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 18
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Levertijd > 25 dagen
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
ID: CALIBRATION SET 12
Prijs:  $571.00
Beknopt overzicht:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 12
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Levertijd > 25 dagen
Measuring Unit Extension (L = 140 mm / 5.51")
Measuring Unit Extension (L = 140 mm / 5.51")
ID: 41.00-VE140
Prijs:  $554.00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 140 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE140
  • Material:  Carbon Fibre
  • Length:  140
  • Diameter:  25 mm
  • External Thread:  M16x1
Levertijd > 25 dagen
Connecting Cable (L = 2 m / 6.6')
Connecting Cable (L = 2 m / 6.6')
ID: 35.40-ST2-X13
Prijs:  $131.00
Beknopt overzicht: 

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Heidenhain controls with control input X13. Shielded cable with D-SUB HD/M9 plug and open wires. Length: 2 m / 6.6'
  • Part Number:  35.40-ST2-X13
Levertijd > 25 dagen
Tool Box 6X.00-TB
Tool Box 6X.00-TB
ID: 6X.00-TB
Prijs:  $41.00
Beknopt overzicht:  Tool kit for installation and maintenance of Infrared Touch Probe IRP60.00 and Infrared Tool Setter IRT65.00. Tool box contents see description.
  • Part Number:  6X.00-TB
  • Compatibility:  IRP60.00, IRT65.00
Levertijd > 25 dagen
Calibration Ring (D = 40 mm / 1.57")
Calibration Ring (D = 40 mm / 1.57")
ID: 91.00-CR
Prijs:  $153.00
Beknopt overzicht:  Calibration ring made of hardened steel with inner diameter of 40 mm. For calibration of tactile probes on machine tools.
  • Part Number:  91.00-CR
  • Application:  Tactile Probe Calibration
  • Material:  Steel, hardened
  • Inner Diameter:  40
Levertijd > 25 dagen
Taper Shank SK40
Taper Shank SK40
ID: 6114
Prijs:  $301.00
Beknopt overzicht: 

Taper shank SK40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.
  • Part Number:  6114
  • Interface:  D11
Levertijd > 25 dagen
Probe Extension (L = 75 mm / 2.96")
Probe Extension (L = 75 mm / 2.96")
ID: 91.00-V75
Prijs:  $267.00
Beknopt overzicht: 

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 75 mm / 2.96"
  • Part Number:  91.00-V75
Levertijd > 25 dagen
Calibration Pin (D = 6 mm)
Calibration Pin (D = 6 mm)
ID: 6164
Prijs:  $126.00
Beknopt overzicht:  Calibration pin (Ø6 mm) made of hardened stainless steel for calibration of laser tool setters on machine tools. Length 50 mm.
  • Part Number:  6164
  • Application:  Laser Tool Setter Calibration
  • Material:  Stainless Steel, hardened
  • Diameter:  6
  • Length:  50
Levertijd > 25 dagen
M3-Cylindrical Stylus (AA-40-SS-5.5-L36.5)
M3-Cylindrical Stylus (AA-40-SS-5.5-L36.5)
ID: H00027378
Prijs:  $203.00
Beknopt overzicht:  Cylindrical stylus with M3 thread, made of anodised aluminium Ø40 mm, stainless steel stem with predefined breaking point, length 36.5 mm. For use on machine tools. Previous part number: 21.00-T36.5/40-M3
  • Part Number:  H00027378
  • Thread:  M3
  • Tip Material:  Aluminium anodised
  • Tip Diameter (D):  40
  • Length (L):  36.5
Levertijd > 25 dagen
BS/M4-Stylus Adapter (SS-6.5-L13.5)
BS/M4-Stylus Adapter (SS-6.5-L13.5)
ID: H00027376
Prijs:  $32.00
Beknopt overzicht:  Stylus adapter made of stainless steel Ø6.5 mm with break shaft connection and internal thread M4, length 13.5 mm. For use on machine tools. Previous part number: 91.00-TA-M4
  • Part Number:  H00027376
  • Diameter (D):  6.5
  • Length (L):  13.5
  • Material:  Stainless Steel
Levertijd > 25 dagen
BS-Square Stylus (TC-10x10x5-SS-3.5-L26)
BS-Square Stylus (TC-10x10x5-SS-3.5-L26)
ID: H00027360
Prijs:  £ 166,00
Beknopt overzicht:  Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm, stainless steel stem, length 26 mm. For tool measurement on turning machines. Previous part number: 21.00-WM26
  • Part Number:  H00027360
  • Thread:  Break Shaft Connection
  • Tip Material:  Tungsten Carbide
  • Tip Size:  10 x 10 x 5 mm
  • Length (L):  26
Levertijd > 25 dagen
BS-Stylus (SS-1.5-SS-3.5-L100)
BS-Stylus (SS-1.5-SS-3.5-L100)
ID: H00027363
Prijs:  £ 136,00
Beknopt overzicht: 

Straight stylus with break shaft connection, stainless steel tip Ø1.5 mm, stainless steel stem Ø3.5 mm, length 100 mm. For use on machine tools. Previous part number: 91.00-T100/R1.5
  • Part Number:  H00027363
  • Thread:  Break Shaft Connection
  • Tip Material:  Stainless Steel
  • Tip Diameter (D):  1.5
  • Length (L):  100
Levertijd > 25 dagen