text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  €84.00
Descrizione:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Numer części:  FX-PR30HINGE
Disponibile - Spedizione in 1-2 Giorni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  €33.00
Descrizione:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Numer części:  FX-M8SPRGNUT
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prezzo:  €43.00
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/150
  • Wymiar:  30 x 30 x 150 mm
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prezzo:  €27.00
Descrizione:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Numer części:  FX-POST
  • Gwint:  M8
Disponibile - Spedizione in 1-2 Giorni
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Prezzo:  €1,020.00
Descrizione:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Numer części:  FX-PILLAR/KIT
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  €22.00
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Numer części:  FX-SO/MAG
  • Długość:  20 mm
  • Średnica:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  €49.00
Descrizione:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Numer części:  FX-PR30PLATE
  • Wymiar:  130 x 30 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prezzo:  €40.00
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/100
  • Wymiar:  30 x 30 x 100 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prezzo:  €49.00
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Numer części:  FX-PR30/250
  • Wymiar:  30 x 30 x 250 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  €38.00
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/50
  • Wymiar:  30 x 30 x 50 mm
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prezzo:  €26.00
Descrizione:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Numer części:  FX-SLIDER
  • Gwint:  M8
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Prezzo:  €46.00
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/200
  • Wymiar:  30 x 30 x 200 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Prezzo:  €95.00
Descrizione:  The spring plunger exerts low forces to hold sensible parts in position.
  • Numer części:  FX-PLUNGER
  • Gwint:  M8
Disponibile - Spedizione in 1-2 Giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  €50.00
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Numer części:  FX-SPRING
  • Gwint:  Bez gwintu
Disponibile - Spedizione in 1-2 Giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  €10.00
Descrizione:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Numer części:  FX-THUMB
  • Gwint:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  €18.00
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/20
  • Długość:  20 mm
  • Średnica:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  €26.00
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/100
  • Długość:  100 mm
  • Średnica:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  €60.00
Descrizione:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Numer części:  FX-SUB45/120
  • Wymiar:  120 x 45 x 12 mm
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  1.200,00 CHF
Descrizione:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-STARTER/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
Disponibile - Spedizione in 1-2 Giorni
Support Stop
Support Stop
ID: FX-SUP__STOP
Prezzo:  87,00 CHF
Descrizione:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Numer części:  FX-SUP/STOP
  • Gwint:  M8
Disponibile - Spedizione in 1-2 Giorni