text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SKU: GB0122-0019
Prix:  480,00 €
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Available
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SKU: GB0122-0008
Prix:  560,00 €
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Available
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
SKU: FC-160SS3-NF
Prix:  1 420,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres mocowania zewnętrznego (A):  1 - 150
  • Zakres mocowania wewnętrznego (I):  34 - 174
  • Materiał:  Stal Nierdzewna
Available
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
SKU: FC-125AL6-NF
Prix:  1 140,00 €
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie (G):  M5
Available
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
SKU: FC-160AL6-NF
Prix:  1 490,00 €
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie (G):  M6
Available
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
SKU: FC-240AL3-NF
Prix:  3 300,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-240AL3-NF
  • Średnica zewnętrzna uchwytu (D1):  240
  • Zakres mocowania zewnętrznego (A):  1 - 288
  • Zakres mocowania wewnętrznego (I):  35 - 295
  • Materiał:  Aluminium
Available
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
SKU: FC-125SS3-NF
Prix:  1 140,00 €
Vue d'ensemble sommaire: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres mocowania zewnętrznego (A):  1 - 126
  • Zakres mocowania wewnętrznego (I):  32 - 122
  • Materiał:  Stal Nierdzewna
Available
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
Prix:  1 004,00 €
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/400
  • Gwint:  M8
En stock
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
SKU: FX-CTSML
Prix:  33,00 €
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
En stock
Vee Block Twin
Vee Block Twin
SKU: FV-VEETWIN
Prix:  47,00 €
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
En stock
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
SKU: FX-SO16__20
Prix:  €18.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/20
  • Długość:  20 mm
  • Średnica:  16 mm
En stock
Hinge Pivot With Handle
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Prix:  €84.00
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Numer części:  FX-PR30HINGE
En stock
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
Prix:  €33.00
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Numer części:  FX-CTMED
  • Gwint:  Bez gwintu
En stock
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Prix:  €819.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/300
  • Gwint:  M8
En stock
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
SKU: FX-SO16__100
Prix:  €26.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/100
  • Długość:  100 mm
  • Średnica:  16 mm
En stock
Spring Nut (M8)
Spring Nut (M8)
SKU: FX-M8SPRGNUT
Prix:  €33.00
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Numer części:  FX-M8SPRGNUT
En stock
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
SKU: FX-BRONZE__KIT
Prix:  €1,061.00
Vue d'ensemble sommaire:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-BRONZE/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
En stock
Pillar 30x30x150mm
Pillar 30x30x150mm
SKU: FX-PR30__150
Prix:  €43.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/150
  • Wymiar:  30 x 30 x 150 mm
En stock
Tension Post (M8)
Tension Post (M8)
SKU: FX-POST
Prix:  €27.00
Vue d'ensemble sommaire:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Numer części:  FX-POST
  • Gwint:  M8
En stock
Standoff Support (M4)
Standoff Support (M4)
SKU: FV-SOSUP
Prix:  €18.00
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Numer części:  FV-SOSUP
  • Długość:  6 mm
  • Średnica:  8 mm
En stock