text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  480,00 CHF
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  560,00 CHF
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Tempi di consegna 10-15 Giorni
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  5 756,00 CHF
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Numer części:  GB0096-2001
  • Kompatybilność WMP:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Kompatybilność oprogramowania:  PC-DMIS (od v2016), QUINDOS (od vQ7R18351)
  • Czas pomiaru:  Test długości: 20 Minut, Test na pierścieniu: 5 Minut, Test na sferze: 5 Minut, Test głowicy: 10 Minut
  • Wymiary:  Wzorzec długości = 300 mm, Pierścień wzorcowy = 25 mm, Sfera wzorcowa = 25 mm
Consegna > 25 giorni
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prezzo:  8 550,00 CHF
Descrizione: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Numer części:  GB0122-1000
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X5, Mocowanie trzpienia (z adapterem) dla HP-S-X3, Mocowanie trzpienia (z adapterem) dla HP-S-X1
  • Oś obrotu:  0° - 360°
  • Kąt obrotu:  0°- 90°
Consegna > 25 giorni
Kinematic Fixture Plate 300x300 mm (Plain)
Kinematic Fixture Plate 300x300 mm (Plain)
ID: KPP-300__300
Prezzo:  546,00 CHF
Descrizione:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Numer części:  KPP-300/300
  • Kompatybilność płyty:  KB-250/250, KB-UNIVL
Disponibile - Spedizione in 1-2 Giorni
Kinematic Fixture Plate 500x500 mm (Plain)
Kinematic Fixture Plate 500x500 mm (Plain)
ID: KPP-500__500
Prezzo:  835,00 CHF
Descrizione:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Numer części:  KPP-500/500
  • Kompatybilność płyty:  KB-400/400, KB-UNIVL
Disponibile - Spedizione in 1-2 Giorni
Kinematic Fixture Plate 300x300x16 mm (M8)
Kinematic Fixture Plate 300x300x16 mm (M8)
ID: KPT-300__300
Prezzo:  880,00 CHF
Descrizione:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Numer części:  KPT-300/300
  • Kompatybilność płyty:  KB-250/250, KB-UNIVL
Disponibile - Spedizione in 1-2 Giorni
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Prezzo:  1 102,00 CHF
Descrizione:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Numer części:  KB-400/400
  • Kompatybilność płyty:  KPP-500/500, KPT-500/500
Disponibile - Spedizione in 1-2 Giorni
Universal Kinematic Fixture Base
Universal Kinematic Fixture Base
ID: KB-UNIVL
Prezzo:  745,00 CHF
Descrizione:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Numer części:  KB-UNIVL
  • Kompatybilność płyty:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
Disponibile - Spedizione in 1-2 Giorni
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Prezzo:  660,00 CHF
Descrizione:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Numer części:  KB-250/250
  • Kompatybilność płyty:  KPP-300/300, KPT-300/300
Disponibile - Spedizione in 1-2 Giorni
Kinematic Base for Fixture Plate 400x400mm
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Prezzo:  768,00 CHF
Descrizione:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Numer części:  KB-300/300
  • Kompatybilność płyty:  KPP-400/400, KPT-400/400
Disponibile - Spedizione in 1-2 Giorni
Kinematic Fixture Plate 400x400mm (Plain)
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Prezzo:  650,00 CHF
Descrizione:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Numer części:  KPP-400/400
  • Kompatybilność płyty:  KB-300/300, KB-UNIVL
Disponibile - Spedizione in 1-2 Giorni
Kinematic Fixture Plate 500x500x16 mm (M8)
Kinematic Fixture Plate 500x500x16 mm (M8)
ID: KPT-500__500
Prezzo:  2 052,00 CHF
Descrizione:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Numer części:  KPT-500/500
  • Kompatybilność płyty:  KB-400/400, KB-UNIVL
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  1 220,00 CHF
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125SS3
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres mocowania zewnętrznego (A):  1 - 126
  • Zakres mocowania wewnętrznego (I):  32 - 122
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prezzo:  1 318,00 CHF
Descrizione:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125AL6
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  1 565,00 CHF
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160AL6
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prezzo:  3.715,00 CHF
Descrizione:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-240AL3
  • Średnica zewnętrzna uchwytu (D1):  240
  • Zakres mocowania zewnętrznego (A):  1 - 288
  • Zakres mocowania wewnętrznego (I):  35 - 295
  • Materiał:  Aluminium
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prezzo:  6.730,00 zł
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160SS3
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres mocowania zewnętrznego (A):  1 - 150
  • Zakres mocowania wewnętrznego (I):  34 - 174
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  4.244,00 zł
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-70SS3
  • Średnica zewnętrzna uchwytu (D1):  70
  • Zakres mocowania zewnętrznego (A):  1 - 71
  • Zakres mocowania wewnętrznego (I):  18 - 66
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  3.999,00 zł
Descrizione: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-70SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  70
  • Zakres mocowania zewnętrznego (A):  1 - 71
  • Zakres mocowania wewnętrznego (I):  18 - 66
  • Materiał:  Stal Nierdzewna
Tempi di consegna 10-15 Giorni