text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Katalog

Katalog

Tool Box 35.20-TB
Tool Box 35.20-TB
Azonosító: 35.20-TB
Ár:  €57.00
Gyors áttekintés:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Numer części:  35.20-TB
  • Kompatybilność:  TS35.20
Raktáron - Kiszállítás 1-2 napon belül
Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
Azonosító: CALIBRATION SET 18
Ár:  €500.00
Gyors áttekintés:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Numer części:  CALIBRATION SET 18
  • Mocowanie:  Połączenie na rowek-Teowy
  • Średnica sfery:  30
Raktáron - Kiszállítás 1-2 napon belül
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
Azonosító: CALIBRATION SET 14
Ár:  €489.00
Gyors áttekintés:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Numer części:  CALIBRATION SET 14
  • Mocowanie:  Połączenie na rowek-Teowy
  • Średnica sfery:  30
Raktáron - Kiszállítás 1-2 napon belül
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
Azonosító: CALIBRATION SET 12
Ár:  €489.00
Gyors áttekintés:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Numer części:  CALIBRATION SET 12
  • Mocowanie:  Połączenie na rowek-Teowy
  • Średnica sfery:  30
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
Azonosító: 41.00-VE115
Ár:  €570.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Numer części:  41.00-VE115
  • Materiał:  Włókno Węglowe
  • Długość:  115
  • Średnica:  25 mm
  • Gwint zewnętrzny:  M16x1
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 140 mm / 5.51")
Measuring Unit Extension (L = 140 mm / 5.51")
Azonosító: 41.00-VE140
Ár:  €474.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 140 mm. Used to extend the length of measuring units on machine tools.
  • Numer części:  41.00-VE140
  • Materiał:  Włókno Węglowe
  • Długość:  140
  • Średnica:  25 mm
  • Gwint zewnętrzny:  M16x1
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
Azonosító: 41.00-VE430
Ár:  €580.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Numer części:  41.00-VE430
  • Materiał:  Włókno Węglowe
  • Długość:  430
  • Średnica:  25 mm
  • Gwint zewnętrzny:  M16x1
A szállítási idő 10-15 nap
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
Azonosító: 41.00-VE450
Ár:  €580.00
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Numer części:  41.00-VE450
  • Materiał:  Włókno Węglowe
  • Długość:  450
  • Średnica:  25 mm
  • Gwint zewnętrzny:  M16x1
A szállítási idő 10-15 nap
M5-Stylus (DS-3-TC-2-L60)
M5-Stylus (DS-3-TC-2-L60)
Azonosító: M00-694-195-000
Ár:  €1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 60 mm. For use on coordinate measuring machines (CMM).
  • Numer części:  M00-694-195-000
  • Gwint:  M5
  • Materiał końcówki:  Diament
  • Średnica końcówki (D):  3
  • Długość (L):  60
Szállítási > 25 nap
M5-Stylus (DS-3-TC-2-L35)
M5-Stylus (DS-3-TC-2-L35)
Azonosító: M00-694-192-000
Ár:  €1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 35 mm. For use on coordinate measuring machines (CMM).
  • Numer części:  M00-694-192-000
  • Gwint:  M5
  • Materiał końcówki:  Diament
  • Średnica końcówki (D):  3
  • Długość (L):  35
Szállítási > 25 nap
M5-Stylus (DS-3-TC-2-L30)
M5-Stylus (DS-3-TC-2-L30)
Azonosító: M00-694-194-000
Ár:  €1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 30 mm. For use on coordinate measuring machines (CMM).
  • Numer części:  M00-694-194-000
  • Gwint:  M5
  • Materiał końcówki:  Diament
  • Średnica końcówki (D):  3
  • Długość (L):  30
Szállítási > 25 nap
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
Azonosító: M00-694-190-000
Ár:  €1,120.00
Gyors áttekintés:  Straight stylus with Ø2 mm, diamond sphere Ø1 mm, tapered tungsten carbide stem Ø0.8/2 mm, length 22 mm. For use on coordinate measuring machines (CMM).
  • Numer części:  M00-694-190-000
  • Gwint:  D2
  • Materiał końcówki:  Diament
  • Średnica końcówki (D):  1
  • Długość (L):  22
Szállítási > 25 nap
M5-Stylus (DS-3-TC-2-L50)
M5-Stylus (DS-3-TC-2-L50)
Azonosító: M00-694-193-000
Ár:  €1,120.00
Gyors áttekintés:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 50 mm. For use on coordinate measuring machines (CMM).
  • Numer części:  M00-694-193-000
  • Gwint:  M5
  • Materiał końcówki:  Diament
  • Średnica końcówki (D):  3
  • Długość (L):  50
Szállítási > 25 nap
Taper Shank CAT50
Taper Shank CAT50
Azonosító: D28-CAT50-W
Ár:  €257.00
Gyors áttekintés: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Numer części:  D28-CAT50-W
  • Interfejs:  D28
A szállítási idő 10-15 nap
Drawing Reading (Web Training 1 Day)
Drawing Reading (Web Training 1 Day)
Azonosító: RE54T153-00039
Ár:  €475.00
Gyors áttekintés: 

Target Group: Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals: To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites: No special prerequisites are required other than computer literacy.
Other Information: To complete the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T (Web Training 1.5 Days)
GD&T (Web Training 1.5 Days)
Azonosító: RE54T153-00032
Ár:  €520.00
Gyors áttekintés: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet.
For more information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
Azonosító: RE54T153-00057
Ár:  €1,680.00
Gyors áttekintés: 

Target Group: Engineers & Designers
Course Goals. To provide in-depth knowledge about form and position tolerances, notation, and setting requirements.
Prerequisites: Basic knowledge in reading technical drawings.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
Azonosító: RE54T153-00033
Ár:  €1,955.00
Gyors áttekintés: 

Target Group: Metrologists, quality control planners, measuring machine programmers, and designers.
Course Goals: To provide in-depth knowledge about form and position tolerances, notation, the meaning of the requirements, and how the requirements can be evaluated.
Prerequisites: Basic knowledge in reading technical drawings. Experience in design or as a user or programmer of measuring machines.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
PC-DMIS Portable, Laser Scanning (Classroom Training 1 Day)
PC-DMIS Portable, Laser Scanning (Classroom Training 1 Day)
Azonosító: RE54T153-00055
Ár:  €710.00
Gyors áttekintés: 

Target Group: New users of measuring arms with PC-DMIS Laser, as well as those who wish to strengthen their basic knowledge in laser scanning.
Course Goals: To provide the basic knowledge required to use laser scanning with the measuring arm in the PC-DMIS software.
Prerequisites: Computer literacy, basic knowledge in reading technical drawings, and basic knowledge of PC-DMIS Measuring Arm.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
Workshop Measurement (Classroom Training 2 Days)
Workshop Measurement (Classroom Training 2 Days)
Azonosító: RE54T153-00007
Ár:  €810.00
Gyors áttekintés: 

Target Group: Anyone who needs basic knowledge in measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals: To provide basic knowledge to build upon in the field of workshop metrology.
Prerequisites: No special prerequisites are required.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com