text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  560,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  480,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Czas dostawy 10-15 dni
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Cena:  418,00 €
Szybki Podgląd: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.

  • Numer części:  FC-JS-125SS3-I
  • Materiał:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Cena:  474,00 €
Szybki Podgląd: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.

  • Numer części:  FC-JS-160SS3-I
  • Materiał:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Cena:  364,00 €
Szybki Podgląd: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.

  • Numer części:  FC-JS-70SS3-E
  • Materiał:  Stainless Steel, vacuum-hardened, ground
Czas dostawy 10-15 dni
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  1 061,00 €
Szybki Podgląd: 

The Swift-Fix Bronze Kit contains 46 components for the construction of basic fixtures. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Numer części:  FX-BRONZE/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x150mm
ID: FX-PR30__150
Cena:  43,00 €
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/150
  • Wymiar:  30 x 30 x 150 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  10,00 €
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/25
  • Gwint:  M4
  • Średnica:  8 mm
  • Długość:  25 mm
W magazynie - wysyłka w ciągu 1-2 dni
Tension Post (M8)
ID: FX-POST
Cena:  27,00 €
Szybki Podgląd: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M8 components.

  • Numer części:  FX-POST
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
ID: FV-SOSUP
Cena:  18,00 €
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Numer części:  FV-SOSUP
  • Gwint:  M4
  • Średnica:  8 mm
  • Długość:  6 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Cena:  1 145,00 €
Szybki Podgląd: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Numer części:  FX-BP400/400
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Kit
ID: FX-PILLAR__KIT
Cena:  1 020,00 €
Szybki Podgląd: 

The pillar kit enables stable horizontal mounting of Swift-Fix elements at different heights on a fixture base plate or CMM table.

  • Numer części:  FX-PILLAR/KIT
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Adjustable (M8)
ID: FX-HEIGHT
Cena:  62,00 €
Szybki Podgląd: 

The adjustable standoff provides maximum flexibility when raising workpieces and positioning other Swift-Fix components.

  • Numer części:  FX-HEIGHT
  • Gwint:  M8
  • Średnica:  16 mm
  • Długość:  50 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  1 955,00 €
Szybki Podgląd: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Numer części:  FX-BP400/600
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Cena:  6,00 €
Szybki Podgląd: 

Retaining screws securely fasten base plates to the machine table and enable precise, repeatable positioning of multiple base plates side by side.

  • Numer części:  FX-BPRTR
  • Gwint:  M8
Czas dostawy 10-15 dni
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  1 254,00 €
Szybki Podgląd: 

The Swift-Fix Starter Kit contains the essential components required for fixture applications on multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Numer części:  FV-STARTERKIT
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  10,00 €
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/15
  • Gwint:  M4
  • Średnica:  8 mm
  • Długość:  15 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Cena:  19,00 €
Szybki Podgląd:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Numer części:  FX-CAPM8/16
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Flexible Vice
ID: FV-SLIDE
Cena:  420,00 €
Szybki Podgląd:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Numer części:  FV-SLIDE
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Cena:  19,00 €
Szybki Podgląd:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Numer części:  FX-CAPM8/20
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni