text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  480,00 €
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  560,00 €
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Livraison sous 10 à 15 jours
Angle Block Slider (M4)
Angle Block Slider (M4)
N° : FV-ANGSLIDER
Prix:  22,00 €
Vue d'ensemble sommaire:  The angle block slider enables users to position elements horizontally on the base plate.
  • Numer części:  FV-ANGSLIDER
  • Gwint:  M4
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
N° : FX-BP500__500
Prix:  1 642,00 €
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP500/500
  • Gwint:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
N° : FV-SO__PIN
Prix:  19,00 €
Vue d'ensemble sommaire: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Numer części:  FV-SO/PIN
  • Gwint:  M4
  • Średnica:  8 mm
  • Długość:  10 mm
En stock - Livraison sous 1 à 2 jours
Corner Bracket
Corner Bracket
N° : FV-CNRBRKT
Prix:  52,00 €
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Numer części:  FV-CNRBRKT
En stock - Livraison sous 1 à 2 jours
Universal Clamp (M8)
Universal Clamp (M8)
N° : FX-CLAMP
Prix:  129,00 €
Vue d'ensemble sommaire:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Numer części:  FX-CLAMP
  • Gwint:  M8
En stock - Livraison sous 1 à 2 jours
Vee Block Single
Vee Block Single
N° : FV-VEE
Prix:  32,00 €
Vue d'ensemble sommaire:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Numer części:  FV-VEE
En stock - Livraison sous 1 à 2 jours
Tension Post (M4)
Tension Post (M4)
N° : FV-POST
Prix:  19,00 €
Vue d'ensemble sommaire:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Numer części:  FV-POST
  • Gwint:  M4
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
N° : FX-BASIC__KIT
Prix:  475,00 €
Vue d'ensemble sommaire:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Numer części:  FX-BASIC/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
En stock - Livraison sous 1 à 2 jours
Toggle Clamp
Toggle Clamp
N° : FX-TOG
Prix:  139,00 €
Vue d'ensemble sommaire:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Numer części:  FX-TOG
  • Gwint:  M8
En stock - Livraison sous 1 à 2 jours
SWIFT-CHECK
SWIFT-CHECK
N° : GB0096-2001
Prix:  5 756,00 €
Vue d'ensemble sommaire:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Numer części:  GB0096-2001
  • Kompatybilność WMP:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Kompatybilność oprogramowania:  PC-DMIS (od v2016), QUINDOS (od vQ7R18351)
  • Czas pomiaru:  Test długości: 20 Minut, Test na pierścieniu: 5 Minut, Test na sferze: 5 Minut, Test głowicy: 10 Minut
  • Wymiary:  Wzorzec długości = 300 mm, Pierścień wzorcowy = 25 mm, Sfera wzorcowa = 25 mm
Livraison > 25 jours
SWIFT-SET
SWIFT-SET
N° : GB0122-1000
Prix:  8 550,00 €
Vue d'ensemble sommaire: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Numer części:  GB0122-1000
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X5, Mocowanie trzpienia (z adapterem) dla HP-S-X3, Mocowanie trzpienia (z adapterem) dla HP-S-X1
  • Oś obrotu:  0° - 360°
  • Kąt obrotu:  0°- 90°
Livraison > 25 jours
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
N° : FC-125AL6
Prix:  1 318,00 €
Vue d'ensemble sommaire: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Numer części:  FC-125AL6
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
N° : FC-240AL3
Prix:  3 715,00 €
Vue d'ensemble sommaire: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Numer części:  FC-240AL3
  • Średnica zewnętrzna uchwytu (D1):  240
  • Zakres mocowania zewnętrznego (A):  1 - 288
  • Zakres mocowania wewnętrznego (I):  35 - 295
  • Materiał:  Aluminium
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
N° : FC-160SS3
Prix:  1 565,00 €
Vue d'ensemble sommaire: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Numer części:  FC-160SS3
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres mocowania zewnętrznego (A):  1 - 150
  • Zakres mocowania wewnętrznego (I):  34 - 174
  • Materiał:  Stal Nierdzewna
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
N° : FC-70SS3-NF
Prix:  845,00 £
Vue d'ensemble sommaire: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Numer części:  FC-70SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  70
  • Zakres mocowania zewnętrznego (A):  1 - 71
  • Zakres mocowania wewnętrznego (I):  18 - 66
  • Materiał:  Stal Nierdzewna
Livraison sous 10 à 15 jours
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
N° : FC-160SS3-NF
Prix:  1 291,00 £
Vue d'ensemble sommaire: 

3-jaw chuck made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Numer części:  FC-160SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres mocowania zewnętrznego (A):  1 - 150
  • Zakres mocowania wewnętrznego (I):  34 - 174
  • Materiał:  Stal Nierdzewna
Livraison sous 10 à 15 jours
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
N° : FC-125AL6-NF
Prix:  1 036,00 £
Vue d'ensemble sommaire: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Numer części:  FC-125AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie (G):  M5
Livraison sous 10 à 15 jours
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
N° : FC-160AL6-NF
Prix:  1 355,00 £
Vue d'ensemble sommaire: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Numer części:  FC-160AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie (G):  M6
Livraison sous 10 à 15 jours