text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  CHF471.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40mm
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  CHF550.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60mm
Czas dostawy 10-15 dni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Cena:  CHF1,110.00
Szybki Podgląd:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-125AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  125mm
  • Zakres Mocowania:  5 - 156mm
  • Materiał:  Aluminium
  • Mocowanie (G):  M5
Czas dostawy 10-15 dni
Vee Locator
ID: FV-FEMALE
Cena:  CHF32.00
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Numer części:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
ID: FV-VEETWIN
Cena:  CHF46.00
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  CHF10.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/20
  • Długość:  20 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  CHF21.00
Szybki Podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Numer części:  FV-CONEADJ
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  CHF750.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/300
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  CHF38.00
Szybki Podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Numer części:  FV-LATSML
  • Długość:  10 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  CHF10.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/25
  • Długość:  25 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
ID: FV-SOSUP
Cena:  CHF17.00
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Numer części:  FV-SOSUP
  • Długość:  6 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Cena:  CHF540.00
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200P
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Centering Pin
ID: FV-MALE
Cena:  CHF23.00
Szybki Podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Numer części:  FV-MALE
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  CHF1,140.00
Szybki Podgląd:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FV-STARTERKIT
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  CHF10.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/15
  • Długość:  15 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  CHF2,300.00
Szybki Podgląd:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FV-FULLKIT
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Flexible Vice
ID: FV-SLIDE
Cena:  CHF407.00
Szybki Podgląd:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Numer części:  FV-SLIDE
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Cena:  CHF21.00
Szybki Podgląd:  The angle block slider enables users to position elements horizontally on the base plate.
  • Numer części:  FV-ANGSLIDER
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  CHF18.00
Szybki Podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Numer części:  FV-SO/PIN
  • Długość:  10 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Corner Bracket
ID: FV-CNRBRKT
Cena:  CHF50.00
Szybki Podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Numer części:  FV-CNRBRKT
W magazynie - wysyłka w ciągu 1-2 dni