text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  CHF1,219.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/400
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
ID: FV-VEETWIN
Cena:  CHF62.10
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  CHF12.65
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/20
  • Długość:  20 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  CHF1,022.35
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/300
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Support (M4)
ID: FV-SOSUP
Cena:  CHF24.15
Szybki Podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Numer części:  FV-SOSUP
  • Długość:  6 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Cena:  CHF1,389.20
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP400/400
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  CHF2,372.45
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP400/600
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Cena:  CHF8.05
Szybki Podgląd:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Numer części:  FX-BPRTR
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  CHF1,546.75
Szybki Podgląd:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FV-STARTERKIT
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  CHF12.65
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/15
  • Długość:  15 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Cena:  CHF1,992.95
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP500/500
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  CHF25.30
Szybki Podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Numer części:  FV-SO/PIN
  • Długość:  10 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Single
ID: FV-VEE
Cena:  CHF41.40
Szybki Podgląd:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Numer części:  FV-VEE
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Cena:  CHF623.30
Szybki Podgląd:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Numer części:  FX-BASIC/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Articulated Fixture Arm (M8)
ID: FX-ARM
Cena:  CHF186.30
Szybki Podgląd:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Numer części:  FX-ARM
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp (M4)
ID: FV-SPRING
Cena:  CHF59.80
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Numer części:  FV-SPRING
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  CHF43.70
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp (M8)
ID: FX-SPRING
Cena:  CHF65.55
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Numer części:  FX-SPRING
  • Gwint:  Bez gwintu
W magazynie - wysyłka w ciągu 1-2 dni
Thumb Screw M8
ID: FX-THUMB
Cena:  CHF12.65
Szybki Podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Numer części:  FX-THUMB
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  CHF24.15
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/20
  • Długość:  20 mm
  • Średnica:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni