text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  480,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  560,00 €
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Czas dostawy 10-15 dni
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Cena:  1 318,00 €
Szybki Podgląd: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-125AL6
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6
Cena:  1 565,00 €
Szybki Podgląd: 

6-Jaw chuck with flange made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-160AL6
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Cena:  1 140,00 €
Szybki Podgląd: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-125AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres Mocowania:  5 - 156
  • Materiał:  Aluminium
  • Mocowanie (G):  M5
Czas dostawy 10-15 dni
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6-NF
Cena:  1 490,00 €
Szybki Podgląd: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-160AL6-NF
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres Mocowania:  5 - 196
  • Materiał:  Aluminium
  • Mocowanie (G):  M6
Czas dostawy 10-15 dni
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
ID: FC-125SS3-NF
Cena:  1 140,00 €
Szybki Podgląd: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Numer części:  FC-125SS3-NF
  • Średnica zewnętrzna uchwytu (D1):  125
  • Zakres mocowania zewnętrznego (A):  1 - 126
  • Zakres mocowania wewnętrznego (I):  32 - 122
  • Materiał:  Stal Nierdzewna
Czas dostawy 10-15 dni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  10,00 €
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/20
  • Gwint:  M4
  • Średnica:  8 mm
  • Długość:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Adjustable Cone (M4)
ID: FV-CONEADJ
Cena:  22,00 €
Szybki Podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Numer części:  FV-CONEADJ
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
ID: FV-BP200__200P
Cena:  594,00 €
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200P
  • Gwint:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  1 955,00 €
Szybki Podgląd: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Numer części:  FX-BP400/600
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  19,00 €
Szybki Podgląd: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.

  • Numer części:  FV-SO/PIN
  • Gwint:  M4
  • Średnica:  8 mm
  • Długość:  10 mm
W magazynie - wysyłka w ciągu 1-2 dni
Corner Bracket
ID: FV-CNRBRKT
Cena:  52,00 €
Szybki Podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Numer części:  FV-CNRBRKT
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Single
ID: FV-VEE
Cena:  32,00 €
Szybki Podgląd:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Numer części:  FV-VEE
W magazynie - wysyłka w ciągu 1-2 dni
Tension Post (M4)
ID: FV-POST
Cena:  19,00 €
Szybki Podgląd: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M4 components.

  • Numer części:  FV-POST
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Cena:  475,00 €
Szybki Podgląd: 

The Swift-Fix Basic Kit provides the essential components required for basic fixture applications. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Numer części:  FX-BASIC/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot with Handle
ID: FX-PR30HINGE
Cena:  84,00 €
Szybki Podgląd: 

The hinge pivot connects two pillars at adjustable angles, providing greater flexibility when mounting large fixtures.

  • Numer części:  FX-PR30HINGE
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  33,00 €
Szybki Podgląd: 

The tension clamp enables workpieces to be clamped quickly and easily with medium clamping force, without obstructing access to the measurement features.

  • Numer części:  FX-CTMED
  • Gwint:  Bez gwintu
  • Kompatybilność słupka naprężającego:  FX-POST
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  26,00 €
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/100
  • Gwint:  M8
  • Średnica:  16 mm
  • Długość:  100 mm
W magazynie - wysyłka w ciągu 1-2 dni
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  33,00 €
Szybki Podgląd: 

Spring nuts added to a pillar provide greater flexibility when positioning vertically mounted elements.

  • Numer części:  FX-M8SPRGNUT
W magazynie - wysyłka w ciągu 1-2 dni