text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  480,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40
Tempi di consegna 10-15 Giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  560,00 €
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60
Tempi di consegna 10-15 Giorni
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  5 756,00 €
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Numer części:  GB0096-2001
  • Kompatybilność WMP:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Kompatybilność oprogramowania:  PC-DMIS (od v2016), QUINDOS (od vQ7R18351)
  • Czas pomiaru:  Test długości: 20 Minut, Test na pierścieniu: 5 Minut, Test na sferze: 5 Minut, Test głowicy: 10 Minut
  • Wymiary:  Wzorzec długości = 300 mm, Pierścień wzorcowy = 25 mm, Sfera wzorcowa = 25 mm
Consegna > 25 giorni
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prezzo:  8 550,00 €
Descrizione: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Numer części:  GB0122-1000
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X5, Mocowanie trzpienia (z adapterem) dla HP-S-X3, Mocowanie trzpienia (z adapterem) dla HP-S-X1
  • Oś obrotu:  0° - 360°
  • Kąt obrotu:  0°- 90°
Consegna > 25 giorni
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prezzo:  2 530,00 €
Descrizione:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FV-FULLKIT
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prezzo:  420,00 €
Descrizione:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Numer części:  FV-SLIDE
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prezzo:  605,00 €
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Numer części:  FV-BP200/200C
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  22,00 €
Descrizione:  The angle block slider enables users to position elements horizontally on the base plate.
  • Numer części:  FV-ANGSLIDER
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  19,00 €
Descrizione:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Numer części:  FV-SO/PIN
  • Długość:  10 mm
  • Średnica:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  52,00 €
Descrizione:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Numer części:  FV-CNRBRKT
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prezzo:  19,00 €
Descrizione:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Numer części:  FV-POST
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  18,00 €
Descrizione:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Numer części:  FV-SLIDER
  • Gwint:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  18,00 €
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Numer części:  FV-SO/MAG
  • Długość:  10 mm
  • Średnica:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  4.317,00 zł
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/400
  • Gwint:  M8
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  142,00 zł
Descrizione:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  202,00 zł
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prezzo:  15.975,00 zł
Descrizione:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-240AL3
  • Średnica zewnętrzna uchwytu (D1):  240
  • Zakres mocowania zewnętrznego (A):  1 - 288
  • Zakres mocowania wewnętrznego (I):  35 - 295
  • Materiał:  Aluminium
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prezzo:  6.730,00 zł
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-160SS3
  • Średnica zewnętrzna uchwytu (D1):  160
  • Zakres mocowania zewnętrznego (A):  1 - 150
  • Zakres mocowania wewnętrznego (I):  34 - 174
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  4.244,00 zł
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Numer części:  FC-70SS3
  • Średnica zewnętrzna uchwytu (D1):  70
  • Zakres mocowania zewnętrznego (A):  1 - 71
  • Zakres mocowania wewnętrznego (I):  18 - 66
  • Materiał:  Stal Nierdzewna
Disponibile - Spedizione in 1-2 Giorni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  142,00 zł
Descrizione:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Numer części:  FX-M8SPRGNUT
Disponibile - Spedizione in 1-2 Giorni