text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  1 004,00 CHF
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/400
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  33,00 CHF
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Numer części:  FX-CTSML
  • Gwint:  Bez gwintu
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
ID: FV-VEETWIN
Cena:  47,00 CHF
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp (M8)
ID: FX-SPRING
Cena:  50,00 CHF
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Numer części:  FX-SPRING
  • Gwint:  Bez gwintu
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  18,00 CHF
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/20
  • Długość:  20 mm
  • Średnica:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  84,00 CHF
Szybki Podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Numer części:  FX-PR30HINGE
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  33,00 CHF
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Numer części:  FX-CTMED
  • Gwint:  Bez gwintu
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  819,00 CHF
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Numer części:  FX-BP300/300
  • Gwint:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  26,00 CHF
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/100
  • Długość:  100 mm
  • Średnica:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  33,00 CHF
Szybki Podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Numer części:  FX-M8SPRGNUT
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Cena:  60,00 CHF
Szybki Podgląd:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Numer części:  FX-SUB45/120
  • Wymiar:  120 x 45 x 12 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Cena:  1 296,00 CHF
Szybki Podgląd:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-STARTER/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  1 061,00 CHF
Szybki Podgląd:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-BRONZE/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x150mm
ID: FX-PR30__150
Cena:  43,00 CHF
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/150
  • Wymiar:  30 x 30 x 150 mm
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
ID: FV-FEMALE
Cena:  33,00 CHF
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Numer części:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  279,00 CHF
Szybki Podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Numer części:  FV-GUIDE480
  • Kompatybilność płyty:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  10,00 CHF
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/20
  • Długość:  20 mm
  • Średnica:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Cena:  2 754,00 CHF
Szybki Podgląd:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-GOLD/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x50mm
ID: FX-PR30__50
Cena:  38,00 CHF
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Numer części:  FX-PR30/50
  • Wymiar:  30 x 30 x 50 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Cena:  18,00 CHF
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/30
  • Długość:  30 mm
  • Średnica:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni