Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SKU: GB0122-0019
Price:  zł2,363.04
Quick overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Numer części:  GB0122-0019
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X3
  • Średnica:  40mm
Delivery time 4-6 weeks
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SKU: GB0122-0008
Price:  zł2,756.16
Quick overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Numer części:  GB0122-0008
  • Kompatybilność:  Mocowanie trzpienia dla HP-S-X1
  • Średnica:  60mm
Delivery time 4-6 weeks
Spring Clamp (M8)
SKU: FX-SPRING
Price:  zł246.24
Quick overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Numer części:  FX-SPRING
  • Gwint:  Bez gwintu
In Stock
Thumb Screw M8
SKU: FX-THUMB
Price:  zł47.52
Quick overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Numer części:  FX-THUMB
  • Gwint:  M8
In Stock
Standoff (D = 16 mm / L = 20 mm)
SKU: FX-SO16__20
Price:  zł90.72
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/20
  • Długość:  20 mm
  • Średnica:  16 mm
In Stock
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Price:  zł414.72
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Numer części:  FX-PR30HINGE
In Stock
Standoff (D = 16 mm / L = 100 mm)
SKU: FX-SO16__100
Price:  zł129.60
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO16/100
  • Długość:  100 mm
  • Średnica:  16 mm
In Stock
Spring Nut (M8)
SKU: FX-M8SPRGNUT
Price:  zł164.16
Quick overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Numer części:  FX-M8SPRGNUT
In Stock
Pillar Top Plate  (10 x M8)
SKU: FX-SUB45__120
Price:  zł293.76
Quick overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Numer części:  FX-SUB45/120
  • Wymiar:  120 x 45 x 12 mm
In Stock
Swift-Fix - Starter Kit
SKU: FX-STARTER__KIT
Price:  zł5,909.76
Quick overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-STARTER/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
In Stock
Vee Block Twin
SKU: FV-VEETWIN
Price:  zł233.28
Quick overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Numer części:  FV-VEETWIN
In Stock
Guide Rail (L = 480 mm)
SKU: FV-GUIDE480
Price:  zł1,291.68
Quick overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Numer części:  FV-GUIDE480
  • Kompatybilność płyty:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Price:  zł47.52
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/20
  • Długość:  20 mm
  • Średnica:  8 mm
In Stock
Cone Adjustable (M4)
SKU: FV-CONEADJ
Price:  zł108.00
Quick overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Numer części:  FV-CONEADJ
  • Gwint:  M4
In Stock
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
Price:  zł164.16
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Numer części:  FX-CTMED
  • Gwint:  Bez gwintu
In Stock
Standoff (D = 20 mm / L = 100 mm)
SKU: FX-SO20__100
Price:  zł129.60
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FX-SO20/100
  • Długość:  100 mm
  • Średnica:  20 mm
In Stock
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
SKU: FV-LATSML
Price:  zł190.08
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Numer części:  FV-LATSML
  • Długość:  10 mm
  • Średnica:  8 mm
In Stock
Swift-Fix - Bronze Kit
SKU: FX-BRONZE__KIT
Price:  zł4,972.32
Quick overview:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Numer części:  FX-BRONZE/KIT
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne Ramię Pomiarowe
In Stock
Standoff (D = 8 mm / L = 25 mm)
SKU: FV-SO8__25
Price:  zł47.52
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Numer części:  FV-SO8/25
  • Długość:  25 mm
  • Średnica:  8 mm
In Stock
Standoff Support (M4)
SKU: FV-SOSUP
Price:  zł90.72
Quick overview:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Numer części:  FV-SOSUP
  • Długość:  6 mm
  • Średnica:  8 mm
In Stock