text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  € 33,00
Beknopt overzicht: 

The tension clamp enables workpieces to be clamped quickly and easily with low clamping force, without obstructing access to the measurement features.

  • Onderdeelnummer:  FX-CTSML
  • Schroefdraad:  Zonder schroefdraad
  • Spankracht comptabiliteit:  FX-POST
  • Toepassing:  CMM, Draagbare meetarm
Levertijd 10-15 dagen
Vee Block Twin
ID: FV-VEETWIN
Prijs:  € 47,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Schroefdraad:  M4
  • Diameter:  8 mm
  • Lengte:  20 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot with Handle
ID: FX-PR30HINGE
Prijs:  € 84,00
Beknopt overzicht: 

The hinge pivot connects two pillars at adjustable angles, providing greater flexibility when mounting large fixtures.

  • Onderdeelnummer:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  € 33,00
Beknopt overzicht: 

The tension clamp enables workpieces to be clamped quickly and easily with medium clamping force, without obstructing access to the measurement features.

  • Onderdeelnummer:  FX-CTMED
  • Schroefdraad:  Zonder schroefdraad
  • Spankracht comptabiliteit:  FX-POST
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  € 819,00
Beknopt overzicht: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Onderdeelnummer:  FX-BP300/300
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  € 33,00
Beknopt overzicht: 

Spring nuts added to a pillar provide greater flexibility when positioning vertically mounted elements.

  • Onderdeelnummer:  FX-M8SPRGNUT
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D = 16 mm / L = 20 mm)
ID: FX-LATMED
Prijs:  € 58,00
Beknopt overzicht: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.

  • Onderdeelnummer:  FX-LATMED
  • Schroefdraad:  M8
  • Diameter:  16 mm
  • Lengte:  20 mm
Op voorraad - verzending 1-2 dagen
SWIFT-CHECK
ID: GB0096-2001
Prijs:  € 5.756,00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Controle van de meetring: 5 minuten, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd > 25 dagen
SWIFT-SET
ID: GB0122-1000
Prijs:  € 8.550,00
Beknopt overzicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.

  • Onderdeelnummer:  GB0122-1000
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Levertijd > 25 dagen
Calibration Sphere G10 (D = 15.875 mm / L = 50 mm)
ID: G39002200
Prijs:  € 462,00
Beknopt overzicht: 

Calibration sphere (Ø 15.875 mm) made of stainless steel with an M8 thread for use on coordinate measuring machines (CMMs).

  • Onderdeelnummer:  G39002200
  • Materiaal van de bol:  Roestvast staal
  • Kogel Diameter (D):  15.875
Levertijd 10-15 dagen
Jogbox (NJB) Kit with cable, 4 m
ID: G59682600
Prijs:  € 1.478,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (4 m).

  • Onderdeelnummer:  G59682600
Op voorraad - verzending 1-2 dagen
Jogbox (NJB) Kit with cable, 6 m
ID: G59682700
Prijs:  € 1.494,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (6 m).

  • Onderdeelnummer:  G59682700
Op voorraad - verzending 1-2 dagen
Jogbox (NJB) Kit with cable, 15 m
ID: G59682800
Prijs:  € 1.698,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (15 m).

  • Onderdeelnummer:  G59682800
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H=144-193.1-214.5 mm)
ID: G39031501
Prijs:  € 1.276,00
Beknopt overzicht: 

Calibration sphere set for coordinate measuring machines (CMMs). The set includes a certified ceramic calibration sphere (Ø 25 mm) and a robust stand that allows precise positioning of the sphere at 0°, 45°, and 90°. With M8 mounting for secure machine fixing.

  • Onderdeelnummer:  G39031501
  • Materiaal van de bol:  Keramiek
  • Kogel Diameter (D):  25
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
ID: G39032100
Prijs:  € 796,00
Beknopt overzicht: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made of ceramic and an extension made of high-strength steel (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.

  • Onderdeelnummer:  G39032100
  • Materiaal van de bol:  Keramiek
  • Diameter van de bol:  25
Levertijd 10-15 dagen
Kinematic Support Kit
ID: FX-KINKIT
Prijs:  € 262,00
Beknopt overzicht:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Onderdeelnummer:  FX-KINKIT
Op voorraad - verzending 1-2 dagen
Standoff Magnet  (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prijs:  € 22,00
Beknopt overzicht: 

The magnetic standoff provides reliable and repeatable holding and raising of magnetic workpieces without restricting access to relevant measurement areas.

  • Onderdeelnummer:  FX-SO/MAG
  • Schroefdraad:  M8
  • Diameter:  16 mm
  • Lengte:  20 mm
Op voorraad - verzending 1-2 dagen
Resting Cone (M8)
ID: FX-CONE
Prijs:  € 22,00
Beknopt overzicht:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Onderdeelnummer:  FX-CONE
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Pillar Base Plate
ID: FX-PR30PLATE
Prijs:  € 49,00
Beknopt overzicht: 

The pillar base plate is used to securely attach a pillar to either a CMM table or a fixture base plate.

  • Onderdeelnummer:  FX-PR30PLATE
  • Grootte:  130 x 30 mm
Op voorraad - verzending 1-2 dagen