Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheitsmaßnahmen bitten wir Sie, Ihr Passwort zurückzusetzen
  1. Startseite
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Preis:  zł 5.667,00
Schnellübersicht: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-125AL6
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
Auf Lager - Versand 1-2 Tage
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Preis:  zł 4.902,00
Schnellübersicht: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-125AL6-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging (G):  M5
Lieferzeit 10-15 Tage
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
ID: FC-125SS3-NF
Preis:  zł 4.902,00
Schnellübersicht: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Onderdeelnummer:  FC-125SS3-NF
  • Buitendiameter klemvoet (D1):  125
  • Klembereik buitenzijde (A):  1 - 126
  • Klembereik binnenzijde (I):  32 - 122
  • Materiaal:  Roestvast staal
Lieferzeit 10-15 Tage
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Preis:  zł 24.751,00
Schnellübersicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Controle van de meetring: 5 minuten, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Lieferzeit > 25 Tage
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Preis:  zł 36.765,00
Schnellübersicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Onderdeelnummer:  GB0122-1000
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Lieferzeit > 25 Tage
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Preis:  zł 82,00
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/20
  • Schroefdraad:  M8
  • Diameter:  20 mm
  • Lengte:  20 mm
Auf Lager - Versand 1-2 Tage
Standoff (D = 20 mm / L = 100 mm)
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Preis:  zł 112,00
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/100
  • Schroefdraad:  M8
  • Diameter:  20 mm
  • Lengte:  100 mm
Auf Lager - Versand 1-2 Tage
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Preis:  zł 116,00
Schnellübersicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Onderdeelnummer:  FX-TOOLS
Auf Lager - Versand 1-2 Tage
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Preis:  zł 95,00
Schnellübersicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Onderdeelnummer:  FX-SO/SUPP
  • Schroefdraad:  M8
  • Diameter:  15 mm
  • Lengte:  10 mm
Auf Lager - Versand 1-2 Tage
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Preis:  zł 267,00
Schnellübersicht: 

The adjustable standoff provides maximum flexibility when raising workpieces and positioning other Swift-Fix components.
  • Onderdeelnummer:  FX-HEIGHT
  • Schroefdraad:  M8
  • Diameter:  16 mm
  • Lengte:  50 mm
Auf Lager - Versand 1-2 Tage
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Preis:  zł 8.407,00
Schnellübersicht: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Onderdeelnummer:  FX-BP400/600
  • Schroefdraad:  M8
Auf Lager - Versand 1-2 Tage
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Preis:  zł 26,00
Schnellübersicht: 

Retaining screws securely fasten base plates to the machine table and enable precise, repeatable positioning of multiple base plates side by side.
  • Onderdeelnummer:  FX-BPRTR
  • Schroefdraad:  M8
Auf Lager - Versand 1-2 Tage
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Preis:  zł 77,00
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/30
  • Schroefdraad:  M8
  • Diameter:  20 mm
  • Lengte:  30 mm
Auf Lager - Versand 1-2 Tage
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Preis:  zł 82,00
Schnellübersicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Onderdeelnummer:  FX-CAPM8/16
  • Schroefdraad:  M8
Auf Lager - Versand 1-2 Tage
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Preis:  zł 409,00
Schnellübersicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Onderdeelnummer:  FX-UNI/JOINT
  • Schroefdraad:  M8
Auf Lager - Versand 1-2 Tage
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Preis:  zł 82,00
Schnellübersicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Onderdeelnummer:  FX-CAPM8/20
  • Schroefdraad:  M8
Auf Lager - Versand 1-2 Tage
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Preis:  zł 11.842,00
Schnellübersicht: 

The Swift-Fix Gold Kit contains 93 components and is designed for the construction of larger, more complex fixtures.The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FX-GOLD/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Auf Lager - Versand 1-2 Tage
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Preis:  zł 4.317,00
Schnellübersicht: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Auf Lager - Versand 1-2 Tage
Vee Locator
Vee Locator
ID: FV-FEMALE
Preis:  zł 142,00
Schnellübersicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Onderdeelnummer:  FV-FEMALE
Auf Lager - Versand 1-2 Tage
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Preis:  zł 202,00
Schnellübersicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Onderdeelnummer:  FV-VEETWIN
Auf Lager - Versand 1-2 Tage